Do you want to learn how to set your AEG oven clock or timer? In this article, we will show you how to do these things and more.
Table of Contents
How To Set AEG Oven Clock
Below, we have listed the steps you need to follow in order to set your AEG oven clock…
Step 1: Turn the oven on.
Step 2: Press the button with the clock icon multiple times till you see the clock icon appear on the display.
Step 3: Using the “+” and “-” buttons, enter your desired time.
Step 4: Press the clock button till you see the clock button appear on the display again. At first, the clock icon will blink. After a few seconds, the clock icon will be steady.
Watch the video below for a visual of how to set an AEG oven clock.
AEG Oven Clock Not Working — How To Fix
If your AEG oven clock is not working, first reset it. If you don’t know how to reset your AEG oven clock, read this article: How To Reset An AEG Oven [Quick Guide]. Also read the article in the link if your AEG oven clock is flashing. If the clock still won’t work or stop flashing after being reset, the clock control is faulty and should be replaced. Below, we have listed the steps you need to follow in order to replace the clock control in your AEG oven…
Step 1: Locate the oven’s circuit breaker.
Step 2: To avoid the risk of electrocution, switch the circuit breaker off.
Step 3: Open the door of the oven.
Step 4: Using a Philips head screwdriver, take out the screws which hold the oven’s control panel assembly in place.
Step 5: Lift the assembly up and lower it down.
Step 6: Take a picture of the clock control to note where each wire goes on it.
Step 7: Disconnect the wires from the clock control.
Step 8: Take out the screws which hold the control board to the control panel assembly.
Step 9: Get a new control board.
Step 10: Position the control board on the control panel assembly and hold it in place with the screws.
Step 11: Reconnect the wires to the control board making sure that each one goes to the right place.
Step 12: Reposition the control panel assembly on the oven.
Step 13: Secure the control panel assembly with the screws.
Step 14: Shut the oven door.
Step 15: Switch the oven’s circuit breaker back on.
Also follow the steps above to replace your control board if your AEG oven clock keeps resetting or your AEG oven timer is buzzing.
The video below will give you a visual of how to replace the control board in an oven.
Check out these articles…
Amana Oven Heating [Issues & Proven Solutions]
AEG Oven Fan [Issues & Proven Solutions]
AEG Oven Heating [Issues & Proven Solutions]
How To Clean An AEG Oven [Detailed Guide]
AEG Oven Light [Issues & Proven Solutions]
How To Use AEG Oven Timer
Follow the steps below to set the timer on an AEG oven with a command wheel…
Step 1: First, turn the oven on and select your desired cooking function.
Step 2: Enter your desired temperature.
Step 3: Push the wheel in to save.
Step 4: Turn the wheel till you see a bell icon on the oven’s display
Step 5: Push the wheel in to select.
Step 6: Rotate the wheel to select how long you want the timer to run.
Step 7: Push the wheel in to save. At the end of the cooking process, the timer will beep.
If your AEG oven uses control knobs and not a command wheel, follow the steps below to set the timer…
Step 1: Turn the oven on.
Step 2: Select your desired cooking mode.
Step 3: Enter your desired temperature using the temperature dial.
Step 4: Press the button with the bell icon to select the timer. If your oven doesn’t have this button, press the clock button till you see the bell icon appear on the display.
Step 5: Do not press any buttons for a few seconds in order to set the timer.
To set the timer on an AEG button with touch controls, follow the steps listed below…
Step 1: Turn the oven on and select your desired heating function.
Step 2: Set your desired your desired temperature.
Step 3: Tap the bell icon once to select the timer.
Step 4: Using the up and down arrows, set your desired time. The timer will set on its own after a few seconds.
Watch the video below for a visual of how to set the timer on your AEG oven.
How To Set AEG Oven Delay Timer
Follow the steps listed below to set your AEG oven delay timer…
Step 1: Select your desired cooking function.
Step 2: Set your desired temperature as well.
Step 3: Now, press the “clock” button once.
Step 4: Enter how long you want your food to cook using the “+” and “-” buttons.
Step 5: Press the “clock” button again.
Step 6: Enter the time of day you want your food to finish cooking at.
Step 7: Open the oven door and place your food inside.
Step 8: Shut the door and press the “clock” button once again to save your selection.
Follow the steps above if you want to set your AEG oven to come on later.
Watch the video below for a visual of how to use your AEG oven delay timer.
AEG Oven Clock/Timer FAQ
How To Turn Off AEG Oven Timer
To turn off the timer of your AEG oven, press the power button. If that doesn’t work, reset the oven by switching the breaker off for 5 minutes.
