Has your Beko oven element stopped working but you have no idea what to do? In this article, we will talk about Beko oven element problems and how to fix them.
Table of Contents
Beko Oven Element Not Working — How To Fix
If your Beko oven element is not working, it is most likely faulty. We will show you how to replace the element in a Beko fan oven and a Beko range oven. Below, we have listed the steps you need to follow in order to replace the element in your Beko fan oven…
Step 1: To avoid the risk of electrocution, switch off the oven’s circuit breaker.
Step 2: Open the door of the oven.
Step 3: Slide out the oven racks and set them aside.
Step 4: Lift the side rails up and pull them out of the oven.
Step 5: Using a Philips head screwdriver, take out the four screws which hold the oven’s inner back panel in place.
Step 6: Lift the panel out of the oven to gain access to the heating element.
Step 7: The heating element is around the fan blade. Take out the two screws which hold it in place.
Step 8: There are other screws on the oven’s rear which hold the element in place, you will need to uninstall the oven to get to them. Take out the screws on the sides of the oven frame which secure it to the cabinet.
Step 9: Lift the oven out of the cabinet.
Step 10: Set the oven on a surface lined with a cloth or piece of cardboard.
Step 11: Go to the oven’s rear and take out the screws which hold the back panel in place.
Step 12: Lift the back panel off and set it aside.
Step 13: Disconnect the wires from the terminals of the bake element.
Step 14: Take out the two screws which hold the element in place.
Step 15: Remove the element. Get a new Beko oven element.
Step 16: Position the element in the oven and return the two screws which hold it in place.
Step 17: Go to the oven’s rear and connect the wires to the terminals of your new Beko oven element.
Step 18: Return the other two screws which hold the element in place.
Step 19: Reposition the oven’s rear panel.
Step 20: Hold panel in place with the screws.
Step 21: Lift the oven up.
Step 22: Push the oven back into the cabinet.
Step 23: Secure the sides of the oven to the cabinet using the screws.
Step 24: Reposition the oven interior’s back panel.
Step 25: Hold the panel in place with the screws.
Step 26: Return the side rails to the oven.
Step 27: Slide the racks back into the oven.
Step 28: Shut the oven door and switch the circuit breaker back on.
Follow the steps above to replace your heating element if your Beko oven fan keeps hitting the element.
Watch the video below for a visual of how to replace your Beko oven element.
Below, we have listed the steps you need to follow in order to replace the element in your Beko range oven…
Step 1: Pull the oven away from the wall.
Step 2: To avoid the risk of electrocution, unplug the oven’s power cord from the outlet or switch the circuit breaker off.
Step 3: Go to the oven’s rear.
Step 4: Using a Philips head screwdriver, take out the screws underneath the corners of the stove top which secure it.
Step 5: Lift the stove top off and set it aside on a cloth lined surface.
Step 6: Using the Philips head screwdriver, take out the screws which hold the upper and lower back panels of the oven in place.
Step 7: Lift the panels off and set them aside.
Step 8: Disconnect the wires from the bake element. The element terminals are on the lower rear of the oven.
Step 9: Take out the screws which hold the element in place.
Step 10: Pull the element out of the oven.
Step 11: Get a new Beko oven element.
Step 12: Slide the new element into the oven.
Step 13: Secure the element to the oven using the two screws.
Step 14: Connect the wires to the terminals of the bake element.
Step 15: Reposition the upper and lower back panels of the oven.
Step 16: Hold the panels in place with the screws.
Step 17: Lift the stove top and place it back on the oven.
Step 18: Return the screws on the rear corners of the stove top which hold it to the oven.
Step 19: Plug the oven’s power cord back in or switch the circuit breaker on.
Step 20: Push the oven back to the wall.
Watch the video below for a visual of how to replace your Beko oven element.
If your Beko oven element still won’t work after replacing it, the wires connected to the terminals may be damaged. Inspect the wires for burns or any type of damage. If the wires appear damaged in any way, contact a technician to fix them as they may be the cause of the problem.
Check out these articles…
How To Clean A Beko Oven [Detailed Guide]
Beko Oven Light [Issues & Proven Solutions]
Beko Oven Knobs [Problems & Proven Solutions]
Bosch Oven Door [How To, Problems & Proven Solutions]
How To Clean A Bosch Oven [Detailed Guide]
Beko Oven Grill Element Not Working — How To Fix
If your grill Beko oven element is not working, it’s most likely faulty. Below, we have listed the steps you need to follow in order to replace your Beko oven grill element…
Step 1: Locate the oven’s circuit breaker.
Step 2: To avoid the risk of electrocution, switch off the oven’s circuit breaker.
Step 3: Open the oven door.
Step 4: Slide out the racks in the oven.
Step 5: Next, you will need to uninstall the oven from the cabinet. Using a Philips head screwdriver, take out the screws on the sides of the oven frame which hold it to the cabinet.
Step 6: Lift the oven out of the cabinet.
Step 7: Set the oven on a sturdy cloth lined surface.
Step 8: Using the Philips head screwdriver, take out the screws which hold the oven’s rear panel in place.
Step 9: Lift the panel off and set it aside.
Step 10: Disconnect the wires from the grill element’s terminals. The grill element terminals are on the oven’s upper rear.
Step 11: Take out the two Philips head screws which hold the grill element to the oven.
Step 12: Go to the oven interior and slide the grill element out.
Step 13: Get a new Beko oven element.
Step 14: Slide the element into the oven.
Step 15: Go to the oven’s rear and return the two screws which hold the element in place.
Step 16: Reconnect the wires to the terminals of the grill element.
Step 17: Reposition the oven’s back panel and hold it in place with the screws.
Step 18: Slide the racks back into the oven.
Step 19: Lift the oven up and push it back into the cabinet.
Step 20: Secure the sides of the oven to the cabinet using the screws.
Step 21: Shut the oven door.
Step 22: Reconnect the power to the oven by switching the circuit breaker on.
Watch the video below for a visual of how to replace the your grill Beko oven element.
If your Beko oven grill element still won’t work after replacing it, inspect the wires connected to the terminals. If the wires appear burnt or damaged in any way, they may be the cause of the problem. Contact a technician to fix the wires
Beko Oven Element FAQ
Where Is The Element In A Beko Oven?
The element in a Beko wall oven is located in the oven right behind the wall panel. Once you remove the panel, you will see the element around the fan blade. The element in a Beko range oven is located close to the bottom. If you remove the oven’s back panel, you should see the element’s terminals somewhere near the bottom of the oven.
