Electrolux Oven Turning On [Issues & Solutions]

If your Electrolux oven won’t turn on and you would like to know why, this article is for you. We will talk about the possible causes of this problem and what to do about them.

Electric Electrolux Oven Won’t Turn On — Causes And Solutions

If your Electrolux oven won’t turn on, the bake element, thermal fuse, or control board could be faulty. The bake element should be tested first. If the element has continuity, move on to test the thermal fuse. If neither the thermal fuse or the bake element is faulty, you should replace the control board. If your Electrolux oven won’t turn on still after replacing the board, there may be a power problem. Contact an electrician to determine if this is the case. If you don’t know how to access your Electrolux bake element, thermal fuse, or control board, look at this article: Electrolux Oven Not Heating & Related Issues [Solutions]

Gas Electrolux Oven Won’t Turn On — Causes And Solutions

If your gas Electrolux oven won’t turn on, the igniter, safety valve, or control board could be faulty. The first component you should test is the igniter. If the igniter isn’t faulty, move on to test the safety valve. If neither the safety valve or the igniter is faulty, the control board should be replaced. If your oven still won’t turn on after replacing the board, there may be a power problem. Contact an electrician to determine if this is the case. If you would like to learn how to replace an Electrolux oven igniter, safety valve, and control board, read the article “Electrolux Oven Not Heating” in the section above this one.

Electrolux Oven Light Won’t Turn On — How To Fix

If the light of your Electrolux oven won’t turn on, there is more than one possible reason. The light bulb, light socket, door light switch, or control board could be faulty. To determine which component is faulty, you will need to test them with a multimeter. To learn how to test and replace each of these components, read the article Electrolux Oven Light [Issues, Solutions & Guide] .

Electrolux Oven Fan Won’t Turn On — How To Fix

If the convection fan of your Electrolux oven won’t turn on, it’s probably faulty. Follow these steps to replace the convection fan…

Step 1: Unplug the oven’s power cord.

Step 2: Using a quarter inch nut driver, take out the screws which hold the upper and lower back panels in place.

Step 3: Set the panels aside and open the door of the oven.

Step 4: Slide out the oven racks.

Step 5: Use a Philips head screwdriver to take out the two screws which hold the hinges to the oven door.

Step 6: Close the door till it’s partially open then lift it off.

Step 7: Take out the screws holding the fan blade cover in place.

Step 8: Using an adjustable wrench, take out the nut which holds the fan blade in place by turning it clockwise.

Step 9: Remove the blade and remove the screws which hold the fan motor in place.

Step 10: Disconnect the wires from the motor and get a new one.

Step 11: Connect the wires to the motor and screw it into place.

Step 12: Return the fan blade and nut which secures it.

Step 13: Reposition the fan blade cover and secure with the screws.

Step 14: Return the oven racks.

Step 15: Reposition the oven door on the hinges and open it.

Step 16: Return the screws which hold the hinges to the door and shut the door.

Step 17: Return the oven’s back panel and hold them in place with the screws.

Step 18: Plug the oven back in.

The video below will give you a visual of how to replace an oven convection fan motor.

Leave a Comment