GE Oven Beeping [Issues & Solutions]

It can be quite annoying to keep hearing a beeping sound from your oven. If your GE oven is beeping, it is either because there is a problem, or it’s indicating something. In this article, we will answer GE oven beeping issues and what you can do to fix them.

GE Oven Beeping F2 — How To Fix

If your GE oven beeps and shows F2 on the display, the control board is faulty. Read this article to learn how to replace the control board in a GE oven. Also read the article in the link if your GE oven beeps and shows F76, F1 or F0.

GE Oven Beeping F7 — Solution

To fix this issue, you will need to clean the ribbon cable. To clean the ribbon cable of your GE oven, follow these steps…

Step 1: Unplug the oven.

Step 2: Pull out the oven.

Step 3: Take out the screws which hold the upper back panel of the oven in place.

Step 4: Remove the panel.

Step 5: The ribbon cable will be somewhere on the control board, disconnect it.

Step 6: Clean the ribbon cable with an eraser.

Step 7: Reconnect the ribbon cable.

Step 8: Return the upper back panel and the screws which secure it.

Step 9: Plug the oven back in.

See also  Jenn-Air Oven Fan [Issues & Proven Solutions]

GE Oven Beeping Every Minute — Cause & Solution

If your GE oven beeps every minute, it may be because it is indicating that the oven is preheated. It may also be because of the kitchen timer. To stop your GE oven from beeping, follow the steps listed below…

Step 1: Hold down the “Bake” and “Hi/Lo”buttons on the control panel simultaneously.

Step 2: Press the kitchen timer button.

Step 3: Press the “Start” button.

Check out these articles…

GE Oven Smell [How To Fix]

How To Replace A GE Oven Insulation [A Guide]

GE Oven Fan [How To, Issues & Proven Solutions]

GE Oven Temperature [Issues & Solutions]

GE Oven Is Making Noise [Various Issues Solved]

GE Oven Thermostat [Problems Solved]

How To Replace A GE Oven Sensor [Quick Guide]

GE Oven Beeping F350 — How To Fix

This problem is probably because of a faulty cooling fan motor. To replace the cooling fan motor in a GE oven, follow these steps…

Step 1: Unplug the oven from the outlet.

Step 2: Remove the top panel of the oven by taking out the screws which secure it.

Step 3: Note where the wires go on the cooling fan motor then disconnect them.

Step 4: Take out the screws which hold the fan motor in place.

Step 5: Remove the fan motor.

Step 6: Get a new fan motor and screw it into place.

Step 7: Reconnect the wires to the motor.

Step 8: Return the top panel and hold it in place with the screws.

See also  Hotpoint Oven Keeps Turning Off [How To Fix]

Step 9: Plug the oven back into the outlet.

Also follow the steps above if your GE oven beeps and shows F96.

Watch the video below for a visual of how to replace the cooling fan motor in an oven.

Leave a Comment