Does your GE oven clock or timer keep beeping? Would you like to know how to set the time in a GE oven? In this article, we will show you solutions to GE oven clock issues and show you how to use some functions in your GE oven.
Table of Contents
GE Oven Clock Blinking — How To Fix
When an oven clock keeps blinking, it usually comes as the result of a power outage. To fix this problem, you will need to reset the oven and clock. To reset your GE oven clock, follow the steps listed below…
Step 1: Unplug the oven.
Step 2: Leave the oven unplugged for about 5 minutes.
Step 3: After 5 minutes, plug the oven back in and turn it on.
Step 4: Set the time.
Also follow the steps above if your GE oven clock is running slowly.
GE Oven Clock Running Fast — How To Fix
If your GE oven clock is running fast, try resetting the oven first. If that doesn’t solve the issue, follow the steps below to replace a GE oven clock…
Step 1: Unplug the oven.
Step 2: Turn the oven around and take out the screws on the upper back of the control panel.
Step 3: Take out the two screws underneath the oven’s control panel. There will be one screw on each side.
Step 4: Cover the oven cooktop using a towel.
Step 5: Lift the control panel up to remove.
Step 6: Lay it on the towel.
Step 7: Take a picture of where the wires go on the clock then disconnect them.
Step 8: Take out the four screws which hold the clock in place.
Step 9: Remove the clock.
Step 10: Get a new clock.
Step 11: Using a putty knife, pry off the overlay on the faulty clock and transfer it to the new one.
Step 12: Reposition the clock and hold it in place using the screws.
Step 13: Reconnect the wires.
Step 14: Lift up the control panel and position it back on the oven.
Step 15: Secure it at the back using the screws.
Step 16: Return the screws underneath the control panel.
Step 17: Remove the towel and plug the oven back in.
Also follow the steps above if your GE oven timer keeps beeping.
Watch the video below for a visual of how to replace the clock in a GE oven.
How Do You Set A GE Oven Clock?
To set a GE oven clock, follow these steps…
Step 1: Press the “Set Clock” button. If nothing appears on the oven display, press the button again.
Step 2: Using the “+” and “-” buttons, set your desired time.
Step 3: After setting the time, press the “Set Clock” button again.
This method should also work on your GE wall oven.
What Is Delay Time On A GE Oven?
Delay time is an oven function which enables you to set when you want to cook your food, the temperature, and how long you would want the food cooked. This function is great because you can have your food ready before you get home from work or elsewhere.
Check out these articles…
GE Oven Will Not Turn Off [How To Fix]
GE Oven Modes [How To, Issues & Solutions]
GE Oven Display [Issues & Solutions]
GE Oven Glass [Problems & Solutions]
GE Range Hood [How To, Issues & Solutions]
How Do I Set The Delay Time On My GE Oven?
To set the delay timer in a GE oven, do the following…
Step 1: Turn the oven on and press the “Bake” button.
Step 2: Set your desired temperature using the numbers on the control panel.
Step 3: Press the button labeled “Cook Time” and enter how long you want the oven to run.
Step 4: Press the “Delay Start” button and set the time of day for the oven to start.
How To Set The Timer On A GE Wall Oven
To set the timer on a GE wall oven, follow the steps listed below…
Step 1: Press the button with the clock icon on it.
Step 2: Select the Kitchen Timer.
Step 3: Set the length of time you want the oven to run.
Step 4: Press the “Set” button.
GE Oven Clock Loses Time — How To Fix
Usually, hard resetting your oven will fix the problem. To hard reset your oven, do the following…
Step 1: Switch the circuit breaker off.
Step 2: Leave the breaker of for 10 minutes.
Step 3: After 10 minutes, switch the circuit breaker on and turn on the oven.
Step 4: Set the time on your oven.
GE Oven Timer Not Loud Enough — Solution
To increase the beeper volume of your GE oven, do the following…
Step 1: Press the “Options” button on the control panel.
Step 2: Turn the dial to “Beeper”.
Step 3: Push the dial in then turn to find your desired setting.
Step 4: Push the dial in again to set your selection.