Are your GE oven controls just not responding or are the control knobs melted? In this article, we we will show you the steps you need to follow to fix these issues.
Table of Contents
GE Oven Controls Not Working — How To Fix
If your GE oven controls aren’t working, first reset your oven. Follow the steps below to do so…
Step 1: Unplug the oven.
Step 2: Switch off the circuit breaker.
Step 3: Leave the circuit breaker off for 5 minutes.
Step 4: After 5 minutes, switch the circuit breaker back on.
Step 5: Plug the oven in and set the clock.
If your GE oven controls aren’t working still after resetting the oven and clock, you will need to replace the control board. Read this article to learn how to replace the control board in a GE oven.
GE Oven Controls Locked — Solution
If your GE oven controls are locked, simply hold down the “9” and “0” buttons down simultaneously till “LOC” clears from the display.
GE Oven Control Knobs Melting — Solution
Unfortunately, if your GE oven control knobs are melted, you will have to replace them. To prevent your oven knobs from melting, ensure that the door is completely closed while broiling. The high temperature used to broil can melt the control knobs if the door isn’t closed. After oven use, you can open the door and place a fan in front of it to cool the oven down. If you leave your oven door open without the fan, the control knobs may get discolored or melted because of the heat. To replace your GE oven control knobs, do the following…
Step 1: Get new control knobs.
Step 2: Unplug the oven.
Step 3: Using a putty knife, carefully pry off the control knobs.
Step 4: Push the new control knobs in.
Check out these articles…
GE Oven Error Codes [How To Fix]
GE Oven Will Not Turn On [Easy Fix]
GE Oven Broiler [Problems & Proven Solutions]
GE Oven Will Not Turn Off [How To Fix]
GE Oven Burner [Problems & Proven Solutions]