The knobs of your oven are what your use to set or adjust the temperature. If your GE stove knobs are stuck or won’t turn, this article will show you how to fix it.
Table of Contents
GE Stove Knob Broke Off — How To Fix
If your GE stove knob has broken off, you will need to replace it. To replace the knob of your GE stove, follow the steps listed below…
Step 1: Unplug the stove.
Step 2: Pull out the knob if it is still attached to the stove.
Step 3: Get a new knob and push it into place.
Watch the video below for a visual of how to replace a GE stove knob.
GE Stove Knob Not Turning — How To Fix
To fix this issue, do the following…
Step 1: Carefully pull out the knob.
Step 2: Get some lubricant and apply it on the rod the knob stays on.
Step 3: Turn the stove knob around as you apply the lubricant.
Step 4: Return the stove knob.
The video below will walk you through what to do if your stove knob isn’t turning.
Check out these articles…
GE Stove Knob Stuck — Quick Fix
If your GE stove knob is stuck, it may be because it’s melted. To remove a stuck stove knob, follow the steps listed below…
Step 1: Get a putty knife.
Step 2: Use the putty knife to pry off the knob. Be careful not to break the knob.
Step 3: Inspect the knob for damage. If the knob is melted, you will need to replace it.
Step 4: Get a new stove knob and push it in.
GE Stove Knob Fell Off
To stop your stove knob from falling off, do the following…
Step 1: Pull out the knob.
Step 2: Get a card and cut out a little rectangular piece of it.
Step 3: Put the small card piece in the hole of the knob.
Step 4: Push the knob back in.
The video below will give you a visual of what you need to do to stop your stove knob from falling off.