There are many different Hotpoint oven settings. In this article, we will talk about these Hotpoint oven settings and how to use them.
Table of Contents
Hotpoint Oven Settings — How To Use
Below, we show you how to use different Hotpoint oven settings…
Hotpoint Oven Pizza Setting — How To Use
To use the pizza setting in a Hotpoint oven, follow these steps…
Step 1: Place your pizza tray in the oven and close the door.
Step 2: Press the “Pizza” button on the oven’s control panel.
Step 3: Using the numbers or arrows, set the temperature.
Step 4: Press the “Timer” button.
Step 5: Enter how long you want the oven to run.
Step 6: Press the “Start” button.
Step 7: Wait for about ten minutes for the oven to preheat.
Step 8: Once the oven is preheated, open the door and place your pizza inside.
Hotpoint Oven Cake Setting — How To Use
Follow the steps listed below to bake a cake in a Hotpoint oven…
Step 1: Turn the oven on and press the “Bake” button. If your oven doesn’t have a touchpad turn the control knob to select top and bottom heat.
Step 2: Set the temperature using the numbers, arrows, or control knob.
Step 3: Press the “Timer” button and enter how long you want the oven to run. Turn the timer knob on the far right of the oven if there isn’t a timer button.
Step 4: Press “Start”. For ovens without a touchpad, skip this step.
Step 5: Wait for the oven to preheat.
Step 6: Once the oven is preheated, open the door and place your cake inside.
The video below will give you a visual of how to bake a cake in a Hotpoint oven.
Hotpoint Oven Bread Setting — How To Use
To use your Hotpoint oven bread setting, simply follow these steps…
Step 1: Open the oven door and place the tray on position 5.
Step 2: Pour 50 g water in the oven tray.
Step 3: Place your bread on the drip pan.
Step 4: Close the oven door and press the “Bread” button or turn the control knob to select the bread setting.
Step 5: Set the temperature and press the “Start” button.
Check out these articles…
Hotpoint Oven Temperature [How To, Issues & Solutions]
Hotpoint Oven Lock [How To, Issues & Solutions]
How To Turn Off A Hotpoint Oven… [Detailed Guide]
Hotpoint Oven Won’t Turn On [Proven Solutions]
Hotpoint Cooker Hood [Problems & Solutions]
Hotpoint Oven Slow Cook Setting — How To Use
Follow the steps listed below to use the slow cook setting in a Hotpoint oven…
Step 1: Open the door and place your food inside.
Step 2: Turn the oven timer to manual.
Step 3: Turn the oven knob to select the fan oven position.
Step 4: Turn the thermostat knob to the “S” temperature setting.
Step 5: After cooking, turn the control knobs to the off setting and take out your food from the oven.
Hotpoint Oven Defrost Setting — How To Use
Below are the steps you need to follow in order to use the defrost setting in a Hotpoint oven…
Step 1: Open the oven door and place your food inside.
Step 2: Close the door.
Step 3: Turn the main control knob to select the defrost setting. This setting has a snowflake icon with a drop of water at the bottom.
Step 4: Once your food is done defrosting, take it out and turn the control knob off.
How To Set A Hotpoint Oven To Come On Later
This is called the delay start function. Below are the steps for you to follow in order to use the delay start setting in a Hotpoint oven…
Step 1: Open the oven door and place your food inside.
Step 2: Turn the control knob to the desired cooking function. For instance convection oven.
Step 3: Set the desired temperature.
Step 4: Press the button with pot icon then set how long you want your food to cook with the “+” and “-” buttons. Make sure to do this within four seconds of pressing the button.
Step 5: Release the button. “auto” and a pot icon should appear on the display.
Step 6: Press the button with the pot and steam icon.
Step 7: Set the time you want the oven to stop cooking your food.
Step 8: Press “Start”.
How To Set The Clock On A Hotpoint Oven
To set your Hotpoint oven clock, do the following…
Step 1: Press the “clock” button.
Step 2: Using the numbers, arrows, or “+” and “-” buttons, type in the time.
Step 3: Press the “clock” button once again to save the setting.