Does your Maytag microwave have a nasty smell or does it have so many tough stains? Well, if this is the case, we are going to show you how to clean a Maytag microwave in such simple steps that anyone could follow them.
Table of Contents
How To Clean a Maytag Microwave
There are many ways to clean a Maytag microwave, so we are going to show you a couple of them for you to choose for.
The Lemon and Water Solution
Of all the other ways to clean your Maytag microwave, this is probably the best. Not only does it make cleaning your microwave easy, it also leaves it with a nice fragrance. To clean your microwave using this method, do the following…
Step 1: Turn off and unplug the microwave.
Step 2: Get a cup of water and pour it in a microwave-safe bowl.
Step 3: Get a lemon and cut it in half.
Step 4: Squeeze the juice into the water then drop the two lemon halves in.
Step 5: Place the bowl in the microwave and let the water bowl on the highest setting for about 5 minutes.
Step 6: After 5 minutes, turn off the microwave and leave for another 5 minutes.
Step 7: Afterwards, take out the lemon and water.
Step 8: Using a sponge, clean the interior of the microwave.
Step 9: Take out the turntable glass tray and wash separately. Do not use the dishwasher for this unless the manual says it’s safe to do so.
Step 10: Wipe the microwave with a cloth and return the glass tray to it.
Baking Soda
Baking soda is a great thing to use to clean your microwave if it has some tough stains. To clean your Maytag microwave using this method, do the following…
Step 1: Turn off the microwave. Always ensure to do this before cleaning your microwave.
Step 2: Mix some water with baking soda to form a paste.
Step 3: Use a sponge to rub the paste on the stains.
Step 4: Let it sit for 5 minutes or more then wipe it with a damp towel.
Step 5: Repeat this process as many times as you need to get rid of all the stains.
Dishwasher Soap Method
This is kind of like the lemon method. All you need to do is follow these steps…
Step 1: Turn off the microwave.
Step 2: Get a microwave-safe bowl and pour some water and soap in it.
Step 3: Open the microwave door and place the bowl in it.
Step 4: Turn the microwave back on and set on high for 3 minutes.
Step 5: After 3 minutes, take the bowl out.
Step 6: Use a sponge to wipe the microwave’s interior. Also clean the door.
Check out these articles…
How to Clean an LG Microwave [Quick Guide]
LG Microwave Door [How To/Issues & Solutions]
LG Microwave is NOT Working [Problems Solved]
LG Microwave Light [Issues & Solutions]
How to Clean A Maytag Microwave Filter
To clean the grease filter in a Maytag microwave, follow the steps listed below…
Step 1: Turn off the microwave.
Step 2: Grip the tab on the filter and pull the filter away from the microwave. The filter is located underneath the microwave.
Step 3: Place the filter in the dishwasher or in a bowl of hot soapy water.
Step 4: Leave the filter to soak for 30 minutes.
Step 5: After 30 minutes, take out the filter and scrub with a sponge.
Step 6: Rinse the filter with some cool water.
Step 7: Place the filter on a towel to dry.
Step 8: Return the filter to the microwave.
The video below will show you how to clean a Maytag microwave filter.
To replace the charcoal filter in a Maytag microwave do the following…
Step 1: Get a new charcoal filter.
Step 2: Turn off and unplug the microwave.
Step 3: Use a screwdriver to take out the screws at the top of the microwave front grille.
Step 4: Take out the grille
Step 5: Remove the old charcoal filter.
Step 6: Install the new one.
Step 7: Return the front grille and hold it in place with the screws.
Step 8: Plug the microwave back in.
Note: There are two types of filters in a microwave, the charcoal and grease filter. When the grease filter gets dirty, you will need to wash it. But if this happens to the charcoal filter, you will need to replace it.
The video below will show you how to replace a Maytag microwave charcoal filter.
To clean the grease filter in a Maytag microwave, do the following…
Step 1: As usual, turn off the microwave.
Step 2: Look underneath the microwave and take out the filters by pulling the tab on each one.
Step 3: Place the filters in a bowl of hot water with some soap.
Step 4: After about 10 minutes, take the filters out and scrub with a soft sponge.
Step 5: Rinse the filters with cool water and place on a towel to dry.
Step 6: Return the filters to the microwave.
Note: Do not operate the microwave without the filters installed.