How To Install A Neff Oven [Detailed Guide]

So, you’ve gotten that oven you wanted but you’d rather install it yourself than have someone do it for you. However, you aren’t really sure how to do this. If you would like to learn how to install a Neff oven, keep reading.

How To Install A Neff Oven

To learn how to install a Neff oven, follow the steps listed below…

Step 1: First, look at the installation manual to see the recommended height, depth, and width of the cabinet. If your cabinet is too small or too big, you will need to call a carpenter to adjust it to the recommended dimensions.

Step 2: Also check the electrical requirements.

Step 3: Turn off the circuit breaker.

Step 4: Remove the junction box cover and push the oven conduit cable into the junction box.

Step 5: Hold the conduit cable in place with a screw.

Step 6: Match the wires of the conduit cable to the existing ones of the same colour.

Step 7: Secure the wires together using wire nuts.

Step 8: Push the wires into the junction box.

Step 9: Return the cover of the junction box and hold it in place using the screws.

Step 10: Turn the circuit breaker back on to test the oven.

Step 11: Turn on the oven. If the oven doesn’t turn on, you need to check the connections you made.

Step 12: Lift the oven up and push it into the cabinet.

See also  How to Reset a Samsung Microwave [Detailed Guide]

Step 13: Open the oven door.

Step 14: Screw the sides of the oven to the cabinet.

Step 15: Close the oven door.

If you would like to know how to set up your Neff oven after installation, click here

Watch the video below if you would like a visual of how to install a Neff oven.

Check out these articles…

GE Oven Is Not Working [Problems Solved]

Oven Smokes [Proven Solutions]

Oven Temperature [How To, Issues & Solutions]

GE Oven Will Not Stay On [How To Fix]

Dutch Oven Tripod [How To]

Oven Tripping [Problems Solved]

How To Clean A Neff Oven [Detailed Guide]

Installing A Neff Combination Oven

The steps listed below should work for the installation of any combination oven. To install a Neff combination oven, follow the steps listed below…

Step 1: Check your oven installation manual to see the recommended dimensions for the oven cabinet to be. Also check the recommended electrical supply.

Step 2: If the dimensions of your cabinet are smaller or bigger than the recommendation, call a carpenter to adjust it accordingly.

Step 3: Unpack the oven and set it on a piece of cardboard so that the floor doesn’t get damaged.

Step 4: Take out the racks in the oven and any other accessories in the oven.

Step 5: Open the door of the top oven and flip the hinge locks.

Step 6: Push the door till there is a small gap.

Step 7: Lift the door up and set it on a towel lined surface.

Step 8: Do the same thing with the bottom oven.

See also  Frigidaire Oven Lock [Guide, Issues & Solutions]

Step 9: Move the oven to the cabinet for the electrical connection.

Step 10: Turn off the circuit breaker.

Step 11: Remove the cover of the junction box on the back wall of the oven cabinet.

Step 12: Connect the conduit cable to the junction box with a conduit connector.

Step 13: Tighten the screw to hold the conduit in place

Step 14: Match the wires of the cable to the existing ones by color.

Step 15: Secure the wires with wire nuts.

Step 16: Push the wires into the junction box and return the cover.

Step 17: Hold the junction box cover in place using the screws.

Step 18: Lift the oven up and push it into the cabinet.

Step 19: Screw the sides of the oven to the cabinet.

Step 20: Return the racks to the oven.

Step 21: Sit the door back on the lower oven and flip the hinge locks.

Step 22: Close the oven door.

Step 23: Do the same with the upper oven.

Step 24: Turn the circuit breaker back on.

Watch the video below for a visual of how to install a combination oven.

Leave a Comment