If the light or control knob in your Neff oven isn’t working, keep reading. In this article we will show you how to replace a Neff oven light bulb and more.
Table of Contents
How To Remove A Neff Oven Control Knob
To remove the control knob of your Neff oven, do the following…
Step 1: Simply pull off the control knob. If the control knob doesn’t come off easily, pry it off with a putty knife.
Step 2: Get a new control knob and push it in.
How To Replace A Neff Fan Oven Element
To learn how to replace a Neff oven fan element, follow the steps listed below…
Step 1: First of all, switch off the circuit breaker to avoid the risk of electrocution.
Step 2: Next, you will need to remove the door. Open the oven door and flip the hinge locks.
Step 3: Lift the door off the oven.
Step 4: Slide out the oven racks.
Step 5: Take out the screws on the back wall of the oven interior.
Step 6: Remove the back panel of the oven.
Step 7: Take out the three screws which secure the element to the oven.
Step 8: Note where the wires go on the element then disconnect them.
Step 9: Get a new element and connect the wires to it.
Step 10: Screw the element to the oven.
Step 11: Reposition the back panel of the oven and hold it in place with the screws.
Step 12: Slide the racks back into the oven.
Step 13: Lift the oven door and sit it back.
Step 14: Flip the hinge locks to secure it.
Step 15: Close the oven door.
Step 16: Switch the circuit breaker back on.
Watch the video below for a visual of how to replace a Neff oven element.
How To Replace A Neff Oven Light Bulb
Replacing a Neff oven light bulb is a lot easier than you think. Read this article to learn how to replace a Neff oven light bulb.
How To Remove A Neff Oven Sliding Door
To remove a Neff oven slide and hide door, follow the steps listed below…
Step 1: Using a screwdriver, push the two hinge locks backward.
Step 2: Open the oven door slightly.
Step 3: Turn the hand locks with a coin.
Step 4: Close the oven door a bit.
Step 5: Grip the sides of the oven door and lift it off.
How To Replace A Neff Oven Selector Switch
To learn how to replace a Neff oven selector switch, follow the steps listed below…
Step 1: First of all, switch off the circuit breaker.
Step 2: Open the oven door and take out the screws on the sides.
Step 3: Close the door then lift the oven out of the cabinet and place on a sturdy towel lined surface.
Step 4: Take out the screws which hold the top and back panel of the oven in place.
Step 5: Remove the panels.
Step 6: Pull out the control knob of the oven and take out the two screws that are now visible. These screws hold the selector switch in place.
Step 7: Pull out the thermostat from the selector switch.
Step 8: Take a picture of where the wires go on the selector switch then disconnect them.
Step 9: Get a new selector switch and connect the wires to it using the picture you took for reference.
Step 10: Push the thermostat back into the selector switch.
Step 11: Position the selector switch and hold it in place with the screws.
Step 12: Push the oven control knob back in.
Step 13: Align the top and back panel of the oven and hold them in place with the screws.
Step 14: Lift the oven up and push it back into the cabinet.
Step 15: Return the screws which secure the oven to the cabinet.
Step 16: Switch the circuit breaker back on.
Check out these articles…
How To Clean A Neff Oven [Detailed Guide]
Neff Oven Defrost Instructions [Detailed Guide]
Neff Circotherm Oven [How To, Issues & Solutions]
Neff Oven Light [Problems & Solutions]
Neff Oven Clock [Problems & Solutions]
How To Replace A Neff Oven Thermostat
To replace the thermostat of a Neff oven, follow these steps…
Step 1: Switch the circuit breaker off.
Step 2: Open the door of the oven and flip the hinge locks.
Step 3: Grip the sides of the oven door and lift it off.
Step 4: Remove the racks in the oven to make it easier to access the thermostat rod.
Step 5: On the upper back wall of the oven interior, you should see the thermostat rod. Carefully pull the thermostat rod from the clips.
Step 6: Take out the screws on each side of the oven to remove it from the cabinet.
Step 7: Lift the oven out of the cabinet and place it on a flat and sturdy surface lined with a cloth.
Step 8: Take out the screws which hold the top and back panel of the oven in place.
Step 9: Now remove the top and back panel.
Step 10: Behind the oven control panel, you should see the thermostat connected to a selector switch. Pull out the oven control knob and take out the screws you see. If your oven doesn’t have control knobs, take out the screws which secure the control panel.
Step 11: Note where the wires go on the thermostat and disconnect them.
Step 12: Pull the thermostat away from the selector switch.
Step 13: Go back to the interior of the oven and push the thermostat rod through the hole at the top of the oven.
Step 14: Click here if you would like to know how to test an oven thermostat. Remove the thermostat and get a new one.
Step 15: Connect the new thermostat to the selector switch.
Step 16: Pass the thermostat rod through the hole in top of the oven.
Step 17: Reconnect the wires to the thermostat and reposition the selector switch.
Step 18: Return the screws which secure the selector switch and push the control knob back in. If your oven doesn’t have control knobs, reposition the control panel and hold it in place with the screws.
Step 19: Sit the thermostat rod in the clips.
Step 20: Align the top and back panel of the oven and secure them using the screws.
Step 21: Lift the door and sit it back on the oven.
Step 22: Flip the hinge locks back to secure it.
Step 23: Lift the oven up and push it back into the cabinet.
Step 24: Return the screws at the sides of the oven which secure it to the cabinet.
Step 25: Close the oven door.
Step 26: Switch the circuit breaker back on.
Watch the video below for a visual of how to replace a Neff oven thermostat.
How To Remove Neff Oven Side Racks
To remove the side racks in your Neff oven, follow these steps…
Step 1: Open the oven door.
Step 2: Grip the side rack and lift it up slightly.
Step 3: Now pull the out the rack.
Step 4: Do the same to remove the other side rack.
