How To Reset A Samsung Oven [& Related Issues Solved]

If your oven is acting unusual and you want to learn how to reset it, keep reading. In this article, we will show you how to reset a Samsung oven.

Samsung Oven SE Reset

To reset the SE error on your Samsung oven, follow these steps…

Step 1: Turn the oven off and unplug the power cord.

Step 2: Leave the oven unplugged for 5 minutes.

Step 3: After 5 minutes, plug the oven in and turn it back on.

If this doesn’t fix the issue, you will need to replace the touchpad. To replace the touchpad of your Samsung oven, follow the steps listed below…

Step 1: Pull the oven away from the cabinet.

Step 2: Unplug the oven’s power cord from the outlet.

Step 3: Go to the back of the oven and take out the screws which secure the upper rear panel.

Step 4: Lift the panel off and set it aside.

Step 5: Disconnect the ribbon cable connected to the control board.

Step 6: Go to the front of the oven and take out the screws which secure the deflector underneath the control panel.

Step 7: Remove the deflector.

Step 8: Remove the screws which secure the control board assembly to the control panel.

Step 9: Take out the screws which hold the spark module on the right side of the oven.

See also  Inglis Oven Control [How To, Issues & Proven Solutions]

Step 10: Also remove the screw which secures the grounding wire right next to it.

Step 11: Remove the screws on the top back of the oven which secure the control panel.

Step 12: Remove the control panel.

Step 13: Take out the three screws on the control panel which hold the touchpad’s metal plate in place.

Step 14: Mark the surrounding area of the touchpad then peel it off.

Step 15: Get a new touchpad and stick it on the metal plate.

Step 16: Screw the metal plate back to the control panel.

Step 17: Reposition the control panel on the oven and return the screws which secure it.

Step 18: Screw the spark module and grounding wire back into place.

Step 19: Also screw the deflector back.

Step 20: Position the control board assembly on the control panel and secure it with the screws.

Step 21: Reconnect the ribbon cable to the control board.

Step 22: Return the back panel and the screws which secure it.

Step 23: Plug the oven back into the outlet.

Step 24: Push the oven to the cabinet.

Watch the video below for a visual of how to replace your Samsung oven’s touchpad.

Samsung Oven Hard Reset

Below we show you how to reset a Samsung oven…

Step 1: Turn the oven off.

Step 2: Switch off the circuit breaker.

Step 3: Leave the breaker off for 15 minutes.

Step 4: After 15 minutes, turn the circuit breaker back on.

Step 5: Turn on the oven.

Check out these articles…

Samsung Oven Error Codes [How To Fix]

How Does A Samsung Oven Work? [Detailed Guide]

How To Connect A Samsung Range [Detailed Guide]

How To Turn On A Samsung Oven [Plus Issues Solved]

How To Turn Off A Samsung Oven [Plus Issues & Solutions]

Samsung Oven Probe [How To, Issues & Solutions]

Samsung Oven Temperature Problems [Proven Solutions]

How To Reset A Samsung Oven’s Control Panel

Below we show you how to reset a Samsung oven control panel…

See also  Electrolux Oven Not Heating & Related Issues [Solutions]

Step 1: Unplug the oven’s power cord and leave for 5 minutes.

Step 2: After 5 minutes, plug the oven back in.

Step 3: Turn the oven on.

Samsung Oven WIFI Reset

To reset your Samsung touchscreen oven WIFI, follow these steps…

Step 1: Press “Menu” and “Back” on the oven’ control panel simultaneously.

Step 2: Select “Factory reset”.

Step 3: Select “Reset Data”.

If your Samsung oven doesn’t have a touchscreen, follow these steps to reset the WIFI…

Step 1: Hold down the “Keep warm” and “3” buttons or the “Bread proof”  and “3” buttons, or the “Menu”and “Child lock” buttons, or the “Back” and “Lamp”  buttons down simultaneously for 3 seconds.

Step 2: Wait for the oven to reset.

To reset your Samsung range WIFI, follow these steps…

Step 1: Hold down the “Keep warm” and “3” buttons or “Timer” and down arrow for 3 seconds.

Step 2: Wait for the display to scroll.

Step 3: Afterwards, hold down the “Smart Control” button for 3 seconds.

How To Reset A Samsung Oven Clock

Below, we show you how to reset a Samsung oven clock…

Step 1: Unplug the oven from the outlet and leave it for 5 minutes.

Step 2: Plug the oven back into the outlet after 5 minutes.

Step 3: Turn the oven on and press the clock icon with “3sec” underneath it.

Step 4: Press the button again to change to pm.

Step 5: Using the numbers on your oven’s control panel, input your desired time.

Step 6: Press the “Start/Set” button.

Watch the video below if you would like a visual of how to set your Samsung oven clock.

See also  How to Oven Dry Clay: The Essential Guide for Crafters

Leave a Comment