How To Reset An AEG Oven [Quick Guide]

Resetting an oven is a way to fix it temporarily. If you would like to learn how to reset an AEG oven, you are in the right place. We will show you how to do this, and a few other things.

How To Reset An AEG Oven

Below, we show you how to reset an AEG oven…

Step 1: Locate the circuit breaker for your oven.

Step 2: Switch the circuit breaker off.

Step 3: Leave the circuit breaker off for 10 minutes.

Step 4: After 10 minutes, switch the circuit breaker back on.

Also follow the steps to reset your AEG oven after a power cut. If your AEG oven doesn’t work after resetting it, read this article: AEG Oven Light [Issues & Proven Solutions]to replace the control board.

How To Factory Reset An AEG Oven

Below, we show you how to reset an AEG oven to the default settings…

Step 1: Turn the oven on.

Step 2: Go to the oven’s main menu by pressing the button.

Step 3: Scroll through the available options till you see “Reset To Default” on the display.

Step 4: Tap the “OK” button to select “Reset To Default”.

Step 5: Press the “OK” button once again to reset the oven to the factory settings.

How To Reset An AEG Oven Clock

Below, we show you how to reset an AEG oven clock…

Step 1: Switch off the oven’s circuit breaker and leave it for 5 minutes.

Step 2: Switch the circuit breaker back on after 5 minutes.

Step 3: Set the time on your oven.

How To Reset AEG Cooker Hood Filter Alarm

This alarm appears when the filter is dirty. Before, resetting the hood filter alarm, you will need to clean the filters. If you reset the hood without cleaning the filters, the alarm will appear again. To clean the filter of your AEG cooker hood, do the following…

Step 1: Get an oven pan.

Step 2: The pan should be big enough for the filters.

Step 3: Pour some water in the pan and place the pan on your stove.

Step 4: Turn the stove on.

Step 5: Once the water is about to boil, pour in 3 heaped tablespoons of a baking soda and salt mixture.

Step 6: Remove the hood filters and place them in the water.

Step 7: Pour some vinegar over the filters.

Step 8: Hold the filters down in the boiling water for about 7 minutes using a pair of tongs.

Step 9: Afterwards, turn off the stove and take out the filters from the water using the tongs.

Step 10: Scrub the filters with a sponge and rinse under some cool water.

Step 11: Place the filters on a towel to dry.

Step 12: Once the filters are dry, return them to the hood.

The video below will show you how to clean your AEG hood filters.

Once you have cleaned your filters, follow these steps to reset it…

Step 1: Turn the hood on.

Step 2: Press and hold down the filter button for about 3 seconds. On some AEG cooker hoods, the filter button has an F/C. On other models, the filter button is the 7th button on the control panel that has a filter icon.

Leave a Comment