Have you just gotten a new Kenmore oven but you don’t know how to use its features? Well, in this article, we will show you how to use a Kenmore oven’s features.
Table of Contents
How To Use A Kenmore Oven Broiler
Below, we have listed the steps you need to follow in order to use your Kenmore oven broiler…
Step 1: Turn the oven on.
Step 2: If you are using a double oven, select “Upper Oven” or “Lower Oven”. If you are using a single oven, skip this step.
Step 3: Press the “Broil” button.
Step 4: Input your desired temperature using the numbers on the oven’s control panel.
Step 5: Press the “Start” button.
Step 6: Leave the oven to preheat for a while.
Step 7: After 10 minutes, open the oven door and place your food inside.
Step 8: Once you are done broiling, turn the oven off and take out your food.
The video below will give you a visual of how to use a Kenmore oven broiler.
How To Kenmore Oven Pizza Setting
Below, we show you how to use a Kenmore oven’s pizza setting…
Step 1: Turn the oven on.
Step 2: If you are using double oven, select the one you want to use. If not, skip this step.
Step 3: Press the “Pizza” button.
Step 4: If you need to, input the temperature using the numbers on the oven’s display.
Step 5: Press “Start” and leave the oven to preheat. This should take about 15 minutes.
Step 6: Afterwards, open the oven door and place your pizza inside.
Step 7: Once you are done baking your pizza, take it out and turn the oven off.
How To Use A Kenmore Oven Warming Drawer
Below, we show you how to use a Kenmore oven’s warming drawer…
Step 1: Arrange the rack in the drawer.
Step 2: Place your food inside the drawer and shut it.
Step 3: Press and hold the “Warming Drawer On/Off” button on the oven’s control panel till you hear a beep.
Step 4: Use the “Hi” and “Lo” buttons to choose your desired heat setting.
Step 5: Press “Start”.
Step 6: Once you are done using the drawer, press the “Cancel” or “Stop” button.
How To Use Flex Clean On Kenmore Oven
To use Flex clean or self clean on your Kenmore oven, follow the steps listed below…
Step 1: First, open the oven door.
Step 2: Remove the racks in the oven and wipe off any loose food bits to prevent excessive smoking.
Step 3: Make sure there aren’t any utensils on the stove top.
Step 4: Shut the oven door and press the “Flex Clean” or “Self Clean” button.
Step 5: Choose how long you want the feature to run using the numeric pad. You can choose from 2 to 4 hours.
Step 6: Press “Start”. During the self clean cycle, make sure no one goes close to the oven as it will get very hot. Also make sure all the windows in your home are open. If you have any pets, make sure they aren’t anywhere close to the oven as the fumes could harm them. At the end of the self clean cycle, do not try to open the door.
Step 7: Leave the oven to cool down to room temperature.
Step 8: Once the oven has cooled down, open the door and wipe out the ash in the interior with a damp cloth.
Step 9: Return the racks to the oven and shut the door.
If you are experiencing any problems with your oven after using the self clean feature, read this article: Kenmore Oven Self Clean [How To, Issues & Solutions]
Check out these articles…
Kenmore Oven Heating Problems [Proven Solutions]
Kenmore Oven Thermostat [How To, Guide]
Kenmore Oven Beeping [How To Fix]
Kenmore Oven Knobs [Problems & Proven Solutions]
How To Use Delay Start On Kenmore Oven
To use delay start on your Kenmore oven, do the following…
Step 1: Press the “Cook Time” button.
Step 2: Input how long you want your food to cook using the numbers on the control panel.
Step 3: Press “Start”.
Step 4: Press “Delay Start”.
Step 5: Enter the time you want the oven to turn on and start cooking.
Step 6: Press “Start”.
Step 7: Press the “Bake” button and input your desired temperature.
Step 8: Press “Start”. The oven will turn on at the time of day set and stop cooking after the set length of time.
How To Use Warm And Hold On A Kenmore Oven
To use the warm and hold setting on your Kenmore oven, do the following…
Step 1: Press the “Warm And Hold” button on the oven’s control panel.
Step 2: Press “Start”.
Step 3: Open the oven door and place your food inside.
Step 4: to turn off this feature, press the “Stop” button.