If your LG oven heating element is not working, keep reading to learn how to replace it…
Table of Contents
How To Replace LG Oven Heating Element
To replace a faulty bake element in an LG oven, simply follow the steps below…
Step 1: Unplug the oven from the outlet to avoid the risk of electrocution.
Step 2: Open the door of the oven.
Step 3: Take out the oven racks.
Step 4: Take out the screws which hold the bottom panel of the oven.
Step 5: Lift up the panel and push it backwards to release it from the oven.
Step 6: Remove the screws securing the heating element.
Step 7: Pull out the heating element carefully.
Step 8: Disconnect the heating element wires.
Step 9: Remove the heating element and get a new one.
Step 10: Position the new element in the oven and reconnect the wires to it.
Step 11: Screw the element into place.
Step 12: Reposition the bottom panel in the oven by pushing the front in then lowering it down.
Step 13: Secure the bottom panel with the screws.
Step 14: Return the racks to the oven.
Step 15: Close the oven door.
Step 16: Plug the oven back into the outlet.
The video below will walk you through the process of replacing the heating element in an oven.
LG Oven Bottom Element Is Not Working — How To Fix
If your bottom LG oven heating element is not working, you should replace it. To replace the bottom heating element of an LG oven, do the following.
Step 1: To avoid the risk of electrocution, turn the oven off and unplug it.
Step 2: Turn the oven around to access the back.
Step 3: Now take out the screws holding the back panel.
Step 4: Remove the back panel.
Step 5: Test the element with a multimeter by touching the probes to the terminals of the heating element. Disconnect the wires connected to the element before doing this. If there is no continuity, the heating element will need to be replaced.
Step 6: Take out the two screws on the lower back of the oven which hold the power cord box in place.
Step 7: Set the power cord box to the side.
Step 8: Using a pair of dikes, clip the small metal pieces around the rectangular metal plate which covers the the heating element.
Step 9: Unscrew the wire above the metal plate.
Step 10: Pry off the plate using a flat head screwdriver.
Step 11: Put on some gloves to prevent the oven insulation from getting on your hands.
Step 12: Lift the oven insulation up.
Step 13: Remove the two screws above the heating element terminals.
Step 14: Pull out the heating element.
Step 15: Get a new element.
Step 16: Slide the new heating element in.
Step 17: Secure it with the two screws you removed before.
Step 18: Push down the oven insulation.
Step 19: Get the rectangular metal plate and position it on the oven. Turn the plate around so that the bottom side is now at the top.
Step 20: There will be screw holes on each side of the plate. Get some screws and insert them into the holes to secure the metal plate.
Step 21: Reconnect the wires to the heating element.
Step 22: Screw the wire above the plate back into place.
Step 23: Position the power cord box and secure it with the screws.
Step 24: Return the back panel and the screws which hold it in place.
Step 25: Turn the oven back.
Step 26: Plug the oven back into the outlet.
The video below will give you a visual of how to replace the bottom heating element in an LG oven.
Check out these articles…
LG Oven Error Codes [Quick Solutions]
LG Oven Igniter [Issues & Proven Solutions]
LG Oven Is Not Working [How To Fix]
LG Oven Smell [Proven Solutions]
LG Oven Turns Off By Itself [How To Fix]
LG Stove Heating Element Is Not Working — How To Fix
To replace your LG stove heating element, follow the steps listed below…
Step 1: Unplug the oven.
Step 2: Open the oven door.
Step 3: Take out the screws underneath the stove top to release it.
Step 4: Lift the stove top up.
Step 5: To remove the stove heating element, you will need to unscrew the rectangular metal plate on it. Take out the screw on each side of the plate.
Step 6: Lift the faulty element off the plate.
Step 7: Disconnect the wires connected to the element.
Step 8: Get a new element.
Step 9: Connect the wires to the element and position it on the rectangular plate.
Step 10: Screw the plate back to the stove top.
Step 11: Lower the stove top.
Step 12: Return the screws underneath the stove top which secure it.
Step 13: Close the door of the oven.
Step 14: Plug the oven in.
The video below will walk you through the processing of replacing an LG stove heating element.
