If you want to learn how to set your Magic Chef oven clock or replace it, you are in the right place. In this article, we will show you how to do these and more.
Table of Contents
How To Set Clock On Magic Chef Oven
Below, we have listed the steps to follow in order to set your Magic Chef oven clock…
Step 1: Turn the oven on.
Step 2: Press the button with the clock icon on it.
Step 3: Using the arrows or “+” and “-” buttons, enter your desired time.
Step 4: Press the “clock” button again to save your selection.
How To Set Magic Chef Microwave Oven Clock
Follow the steps below to set your Magic Chef microwave oven clock…
Step 1: Turn the microwave on.
Step 2: Press the “Clock” button. If you want to use the 24 hour system, press the “Clock” button once again.
Step 3: Enter your desired time using the numbers on the microwave’s control panel.
Step 4: Press the “Clock” button to set the time.
Magic Chef Oven Clock Making Noise — How To Fix
If your Magic Chef oven clock is making noise, you should reset it. Read this article: How To Reset A Magic Chef Oven [Quick Guide] to reset your Magic Chef oven clock. If the clock still makes noise after resetting it, the clock control should be replaced. Below, we have listed the steps you need to follow in order to replace your Magic Chef oven clock control…
Step 1: Locate the oven’s circuit breaker.
Step 2: To avoid the risk of electrocution, switch the circuit breaker off.
Step 3: Pull off the oven’s control knobs.
Step 4: Using a Philips head screwdriver, take out the screws at the top of the oven which hold the trim in place.
Step 5: Remove the oven’s top trim piece and set it aside.
Step 6: Lift the control panel up.
Step 7: Slide the indicator light off the control panel.
Step 8: Disconnect the wires connected to the control panel.
Step 9: Set the panel aside.
Step 10: Take out the Philips head screws which hold the clock control to the front panel’s housing.
Step 11: Pull the clock control forward.
Step 12: Note where each wire goes on the control.
Step 13: Disconnect the wires from the clock control and get a new one.
Step 14: Connect the wires to the new clock control.
Step 15: Position the control in the housing and hold it in place with the Philips head screws.
Step 16: Take the control panel back to the oven and connect the wires back to it.
Step 17: Position the indicator light on the control panel.
Step 18: Reposition the panel and top trim on the oven.
Step 19: Hold the trim in place with the Philips head screws.
Step 20: Push the oven control knobs back into place.
Watch the video below for a visual of how to replace the clock control in your Magic Chef oven.
Check out these articles…
How To Set Magic Chef Oven Timer
Below, we show you how to set the timer of your Magic Chef oven…
Step 1: Turn the oven on.
Step 2: Place your food inside the oven and shut the door.
Step 3: Select your desired cooking mode.
Step 4: Enter your desired temperature and press “Start”.
Step 5: Press the “Timer” button. If your oven doesn’t have this button, hold down “0” for about 3 seconds.
Step 6: Enter how long you want your food to cook.
Step 7: Press the “Start” button. Once the time set has been reached, the oven will beep.