There are some turntable problems you may be experiencing with your Maytag microwave but have no idea what to do about. Well, if this is the case, you are in the right place because we are going to show you how to fix some Maytag microwave turntable issues.
Table of Contents
Maytag Microwave Turntable Not Turning
If your Maytag microwave turntable is not turning or makes noise, it could be the result of a faulty motor, glass tray support, or coupler. So, let us get into how to check and replace these components…
The Turntable Motor
To replace the turntable motor in a Maytag microwave, follow the steps listed below…
Step 1: First, turn off the microwave and unplug it from the outlet.
Step 2: Open the microwave door and take out the glass tray and support.
Step 3: Turn the microwave and lie it on its back.
Step 4: Using a screwdriver, remove all the screws that secure the bottom panel to the microwave.
Step 5: Gently pull the bottom panel.
Step 6: Disconnect the wires connected to the turntable motor.
Step 7: Disconnect the other plug on the right.
Step 8: Remove the bottom panel and set it aside.
Step 9: Take out the two screws securing the turntable motor using a screwdriver.
Step 10: Remove the turntable motor and take out the spacer from the shaft.
Step 11: Slide the spacer on the shaft of the new turntable motor. It is recommended to get a new spacer for the turntable motor.
Step 12: Install the new motor and hold it in place with the two screws.
Step 13: Return the bottom panel and connect the wires to the turntable motor.
Step 14: Also reconnect the plug at the right side.
Step 15: Secure all the sides of the bottom panel with the screws.
Step 16: Turn the microwave back to its upright position.
Step 17: Return the turntable and support to the microwave.
Step 18: Plug the microwave back in.
If your Maytag microwave turntable is still not working well, keep reading.
The video below will show you how to replace your Maytag microwave turntable motor.
The Coupler
To know if you should replace the coupler in your Maytag microwave, do the following…
Step 1: Unplug the microwave.
Step 2: Take out the glass tray and support from the microwave.
Step 3: Pull out the coupler from the hole and closely inspect for cracks or any damage.
Step 4: If the coupler is damaged, get a new one.
Step 5: Push the new coupler into the hole and return the glass tray and support.
The Glass Tray Support
Your Maytag microwave turntable may have stopped turning because of a bad glass tray support. Turn off the microwave and open the door. Take out the glass tray and inspect the support for any damage. If you notice any damage, replace it.
If your Maytag microwave turntable is not turning still it may be the result of a faulty control board. This occurs very rarely, so make sure to inspect the other components listed above before replacing this one. to know how to replace the control board in a Maytag microwave, click here
Check out these articles…
How to Clean an LG Microwave [Quick Guide]
LG Microwave Door [How To/Issues & Solutions]
LG Microwave is NOT Working [Problems Solved]
LG Microwave Light [Issues & Solutions]