Neff Oven Is Not Working [Various Problems Solved]

If the light bulb or fan in your Neff oven is not working, keep reading. In this article, we will show you how to fix this problem and other related ones.

Neff Oven Is Not Working After Cleaning — How To Fix

If your Neff oven is not working after using the self clean feature, the high temperature probably damaged the thermal fuse. To replace the thermal fuse in your Neff oven, follow these steps…

Step 1: Turn off the power supply to the oven.

Step 2: Pull out the oven to gain access to the back.

Step 3: Take out the screws securing the back panel of the oven.

Step 4: Remove the back panel.

Step 5: Disconnect the wires connected to the thermal fuse.

Step 6: Test the fuse using a multimeter. If there is no continuity, the fuse is faulty.

Step 7: Unscrew the faulty thermal fuse and get a new one.

Step 8: Screw the new thermal fuse into place.

Step 9: Reconnect the thermal fuse wires.

Step 10: Reposition the back panel of the oven and hold it in place with the screws.

Step 11: Push the oven back into place.

Step 12: Turn on the oven’s power supply.

The video below will walk you through the process of replacing the thermal fuse in an oven.

Neff Oven Is Not Working After Power Cut — How To Fix

If your Neff oven is not working after a power cut, you should reset it. To reset your Neff oven, do the following…

Step 1: Turn off your oven.

Step 2: Switch off the circuit breaker.

Step 3: Leave the circuit breaker off for 10 minutes.

Step 4: After 10 minutes, turn the circuit breaker back on.

Step 5: Turn on the oven and set the time. Click here to learn how to set the time on your Neff oven.

Neff Oven Is Not Working But Grill Is — How To Fix

If your Neff oven is not working but the grill is, the heating element is faulty. Follow the steps below to learn how to replace the heating element in a Neff oven…

Step 1: Turn off the circuit breaker.

Step 2: Open the door of the oven and remove the racks.

See also  GE Oven Modes [How To, Issues & Solutions]

Step 3: Flip the locks on the door hinges towards yourself to release the door.

Step 4: Lift the door off and set it aside.

Step 5: Using a screwdriver, take out the screws which hold the back plate of the oven interior in place.

Step 6: Take out the three screws which secure the heating element. The heating element is around the fan blade.

Step 7: Pull the element gently.

Step 8: Disconnect the wires connected to the heating element making sure to note where each one goes.

Step 9: Get a new heating element and connect the wires to it.

Step 10: Position the heating element on the oven’s back wall.

Step 11: Hold the heating element in place with the screws.

Step 12: Reposition the back plate of the oven and hold it in place with the screws.

Step 13: Position the door back on the oven and flip the hinge locks to secure it.

Step 14: Return the racks to the oven.

Step 15: Close the oven door.

Step 16: Turn on the oven’s power supply.

Also follow the steps above if your Neff oven fan is working but not heating up.

The video below will walk you through the process of replacing the heating element in a Neff oven.

Neff Oven Light Not Working — How To Fix

If your Neff oven light is not working, you will need to replace the bulb. To replace the light bulb in your Neff oven, follow these steps…

Step 1: Turn off the oven and switch off the circuit breaker.

Step 2: Open the oven door.

Step 3: Remove the racks in the oven.

Step 4: Remove the light cover.

Step 5: Unscrew the light bulb.

Step 6: Get a new light bulb and screw it into place.

Step 7: Return the light bulb cover.

Step 8: Slide the racks back into the oven.

Step 9: Close the oven door.

Step 10: Switch the circuit breaker back on.

Check out these articles…

Neff Oven Error Code [Detailed Guide To Solutions]

Neff Cooker Hood Is Not Working [How To Fix]

How To Connect A Neff Oven [Detailed Guide]

Neff Oven Temperature [How To, Issues & Solutions]

Neff Oven Is Stuck [Easy Solutions]

Neff Oven Thermostat Problems [Solved]

Neff Oven Is Not Cooking Properly [Proven Solutions]

Neff Oven Fan Is Not Working — How To Fix

If the fan in your Neff oven is not working, the fan blade or fan motor is faulty. To replace the fan blade and motor in a Neff oven, follow the steps listed below…

Step 1: First, turn off the oven and switch the circuit breaker off.

See also  LG Microwave Won’t Turn On [Quick Fix]

Step 2: Open the door of the oven and slide out the racks.

Step 3: Uninstall the oven from the cabinet by taking out the screws on the sides.

Step 4: Lift the oven out and set on a cloth lined sturdy surface.

Step 5: Flip the clips on the door hinges.

Step 6: Lift the oven door and set it aside.

Step 7: Take out the screws which hold the fan blade cover in the oven.

Step 8: Take out the bolt in the center of the fan blade.

Step 9: Slide out the fan blade. If the hole in the fan blade is not round, you will need to replace it.

Step 10: Go to the back of the oven and take out the screws which secure the back panel.

Step 11: Remove the back panel.

Step 12: Disconnect the wires connected to the fan motor and make sure to note where each one goes.

Step 13: Take out the three screws which secure the fan motor.

Step 14: Turn the fan motor counterclockwise to remove.

Step 15: Get a new fan motor.

Step 16: Position the fan motor and turn it clockwise.

Step 17: Secure the fan motor with the three screws.

Step 18: Reconnect the wires to the fan motor.

Step 19: Return the back panel of the oven and secure it with the screws.

Step 20: If the fan blade is bad, get a new one and position it in the oven.

Step 21: Secure the fan blade with the bolt.

Step 22: Return the fan cover and the screws which secure it.

Step 23: Push the oven back into the cabinet and secure the sides to it.

Step 24: Return the oven door and flip the hinge locks to hold it in place.

Step 25: Slide the racks back into the oven.

Step 26: Close the oven door and switch the circuit breaker back on.

Watch the video below for a visual of how to replace the fan blade and motor in a Neff oven.

Grill Is Not Working In Neff Oven — How To Fix

If your Neff oven grill isn’t working, you need to replace the element. To replace the element in a Neff oven, follow the steps listed below…

Step 1: As always, turn off the oven and switch the circuit breaker off.

Step 2: Open the door of the oven and take out the screws which hold it to the cabinet.

Step 3: Lift the oven out of the cabinet and set on a sturdy surface lined with a cloth.

Step 4: Take out the screws which secure the back panel of the oven.

Step 5: Peel back the insulation which covers the two screws securing the grill element.

See also  LG Oven Error Codes [Quick Solutions]

Step 6: Take out the screws holding the element in place.

Step 7: Note where each wire is connected to on the grill element then disconnect them.

Step 8: For safety, remove the light bulb and cover.

Step 9: Take out the two screws holding the grill element to the top of the oven interior.

Step 10: Pull out the oven grill element.

Step 11: Get a new grill element and push it into place.

Step 12: Return the two screws which secure it to the top of the oven.

Step 13: Screw the light bulb back in and return the cover.

Step 14: Reconnect the wires to the grill element.

Step 15: Return the two screws at the back of the oven which secure the grill element.

Step 16: Reposition the back panel of the oven and hold it in place with the screws.

Step 17: Lift the oven and push it into the cabinet.

Step 18: Secure the sides of the oven to the cabinet.

Step 19: Slide the racks back into the oven.

Step 20: Close the oven door and switch the circuit breaker back on.

The video below will give you a visual of how to replace the grill element in a Neff oven.

Neff Oven Light Is Not Working After Replacing Bulb — How To Fix

The first possible reason the light of your Neff oven is not working still after replacing the bulb is probably because you bought wrong one. If the bulb you got for your Neff oven is not the recommended one, it won’t work. Check the bulb, if it’s the right type, it may not be screwed in tightly.

Check if the light bulb is properly screwed in. If it isn’t, tighten it. However, if the bulb is tightly fitted, the light socket is probably faulty. Follow the steps below to replace the light socket in a Neff oven.

Step 1: Turn off the circuit breaker.

Step 2: Open the oven door and remove the racks.

Step 3: Take out the screws on each side of the oven.

Step 4: Pull out the oven from the cabinet and place on a towel lined surface.

Step 5: Remove the light bulb cover.

Step 6: Unscrew the light bulb from the socket.

Step 7: Take out the screws which hold the back panel of the oven in place.

Step 8: Disconnect the wires from the light bulb socket and make sure to note where each one goes.

Step 9: Go back to the oven interior and release the tabs which secure the socket using a flat head screwdriver. Have someone push the back of the socket while you do this.

Step 10: Get a new socket and push it into place.

Step 11: Reconnect the wires to the socket.

Step 12: Reposition the back panel of the oven and secure with the screw.

Step 13: Screw the light bulb back into the socket and return the cover.

Step 14: Return the oven to the cabinet and secure the sides with the screws.

Step 15: Slide the racks back into the oven.

Step 16: Close the oven door and turn on the circuit breaker.

Leave a Comment