Neff Oven Temperature [How To, Issues & Solutions]

Are you facing some Neff oven temperature problems? If so, keep reading because we will show you how to fix them in this article.

Neff Oven Defrost Temperature

The temperature for defrosting food in your oven should be 130 – 140 degrees C.

How To Use An Oven Temperature Probe

To use the temperature probe in your oven, follow these steps…

Step 1: Insert the temperature probe into the thickest part of the meat.

Step 2: Place the meat in the oven and close the door.

Step 3: Select the “probe” feature and start the cooking process.

Neff Oven Temperature Knob Not Working — How To Fix

If your Neff oven temperature knob is not working, you should replace it. To replace the temperature knob of your Neff oven, follow these steps…

Step 1: Turn off the oven.

Step 2: Pry off the faulty knob from the oven using a flat head screwdriver.

Step 3: Get a new knob and push it into place.

Neff Oven Temperature Problems — How To Fix

Below, we have listed common temperature problems people have with their Neff oven.

Neff Oven Temperature Not Accurate — Cause And Solution

If your Neff oven temperature is way off from what you set, the temperature sensor or thermostat is faulty. To replace the thermostat in a Neff oven, follow these steps…

See also  Kenmore Oven Control [Issues & Proven Solutions]

Step 1: Turn off the oven’s circuit breaker.

Step 2: Open the oven door.

Step 3: Flip the clips on the hinges towards yourself.

Step 4: Lift the door off the oven.

Step 5: Take out the screws on the two sides of the oven which hold it to the cabinet.

Step 6: Pull the oven out of thee cabinet and place on a flat and sturdy surface lined with a cloth.

Step 7: Remove the racks in the oven.

Step 8: On the top back wall of the oven interior, you will see the thermostat’s capillary tube sitting on some clips. Carefully pull it away.

Step 9: Take out the screws which secure the oven’s back panel.

Step 10: Set the panel aside.

Step 11: Also take out the screws holding the top panel in place.

Step 12: Behind the oven’s control knob, you will see the thermostat. If the thermostat is connected to a selector switch, pull out the knob in front of it and take out the screws which hold it in place.

Step 13: Note where each wire is connected to on the thermostat then disconnect them.

Step 14: Pull the thermostat away from the selector switch.

Step 15: Push the thermostat’s capillary tube out through the hole in the oven.

Step 16: Get a new thermostat and insert the capillary tube into the hole.

Step 17: Push the thermostat into the selector switch.

Step 18: Connect the wires to the right places on the thermostat.

Step 19: Position the selector switch and screw it into place.

See also  Amana Oven Self Clean [How To, Issues & Solutions]

Step 20: Push the control knob back in.

Step 21: Reposition the top and back panel of the oven.

Step 22: Secure them with the screws.

Step 23: Go to the oven interior and sit the thermostat’s capillary tube back on the clips.

Step 24: Lift up the oven door and insert the hinges into the slots in the oven.

Step 25: Flip the clips back.

Step 26: Push the oven back into the cabinet.

Step 27: Secure the sides of the oven to the cabinet.

Step 28: Close the oven door and turn on the circuit breaker.

Watch the video below for a visual of how to replace the thermostat in an oven.

Check out these articles…

Neff Oven Error Code [Detailed Guide To Solutions]

Neff Cooker Hood Is Not Working [How To Fix]

How To Connect A Neff Oven [Detailed Guide]

Neff Oven Is Not Heating Up [How To Fix]

Neff Oven Is Overheating [How To Fix]

Neff Oven Thermostat Problems [Solved]

Neff Oven Is Not Cooking Properly [Proven Solutions]

If replacing the thermostat didn’t fix the issue, the temperature sensor is faulty. To replace a Neff oven temperature sensor, follow the steps listed below…

Step 1: Switch off the circuit breaker.

Step 2: Open the oven door and uninstall it. Do this by flipping the locks on the hinges towards yourself then lifting it off.

Step 3: Remove all the racks in the oven.

Step 4: The temperature sensor should be at the upper left corner of the oven interior. Take out the two screws which secure it.

See also  Amana Oven Igniter [Problems & Proven Solutions]

Step 5: Pull out the temperature sensor gently.

Step 6: Disconnect the wire plug connected to the sensor.

Step 7: Get a new sensor.

Step 8: Connect the wire plug to the temperature sensor.

Step 9: Push the temperature sensor into the hole.

Step 10: Secure the temperature sensor using the screws.

Step 11: Return the racks to the oven.

Step 12: Reinstall the oven door by inserting the hinges into the slots in the oven.

Step 13: Lower the oven door down.

Step 14: Flip the locks on the hinges backwards to secure the door.

Step 15: Switch the circuit breaker on.

The video below will walk you through the process of replacing the temperature sensor in an oven.

Leave a Comment