Is your Samsung gas range flame high or does it have an unusual color. Keep to learn how to fix Samsung gas range flame problems.
Table of Contents
Samsung Gas Range Flame Too High — How To Fix
If the flame of your Samsung oven is too high, the gas valve and pressure regulator should be replaced. Below are the steps you need to follow to replace your Samsung oven gas valve and regulator…
Step 1: Unplug the oven.
Step 2: Shut off the gas supply to the oven.
Step 3: Using a wrench, take out the bolt which secures the gas pipe to the regulator.
Step 4: Set the gas pipe aside.
Step 5: Go to the front of the oven and pull out the bottom drawer.
Step 6: Lift the drawer out and set it aside.
Step 7: Look underneath the oven. If there is a metal shield covering the gas valve, take out the screws which secure it.
Step 8: Take out the valve shield from the oven and set it aside.
Step 9: Loosen the bolt which secures the gas tub to the valve.
Step 10: Disconnect the two wires connected to the gas valve.
Step 11: Take out the screws which hold the gas valve and pressure regulator in place.
Step 12: Remove the gas valve assembly from the oven.
Step 13: Get a replacement gas valve and regulator.
Step 14: Unscrew the mounting brackets from the old assembly and position them on the new one.
Step 15: Screw the mounting brackets to the new gas valve assembly.
Step 16: Remove the fitting on the old regulator and position it on the new one. Apply sealant to the fitting before screwing it to the new regulator.
Step 17: Position the gas valve assembly in the oven and hold it in place with the screws.
Step 18: Reconnect the wires to the gas valve assembly.
Step 19: Connect the gas tube to the new gas valve and hold it in place with the nut.
Step 20: Reposition the valve shield and hold it in place with the screws.
Step 21: Slide the bottom drawer of the oven back in.
Step 22: Go to the back of the oven and screw the gas pipe back to the pressure regulator.
Step 23: Turn on the gas supply.
Step 24: Plug the oven back in.
If you would like a visual of how to replace the gas valve and pressure regulator in an oven, watch the video below.
Check out these articles…
Samsung Oven Heating [How To, Problems & Proven Solutions]
How To Preheat A Samsung Oven [& Related Issues Solved]
Samsung Gas Range Will Not Light [Why & How To Fix]
How To Set The Clock On A Samsung Oven [Detailed Guide]
Samsung Oven Broiler [Issues & Solutions]
Samsung Gas Range Flame Adjustment
To adjust your Samsung range flame, follow these steps…
Step 1: Turn on the faulty burner and set it to low.
Step 2: Pull off the oven knob.
Step 3: Hold the stem of the burner valve in place using a pair of pliers.
Step 4: Insert a 1/8th inch screwdriver into the opening in the stem.
Step 5: To reduce the flame, turn the screw in the stem to the right. Turn the screw to the left to increase the flame.
Step 6: Push the knob back in and turn off the burner.
Step 7: Follow these same steps to adjust the flame of any other burners.
Samsung Gas Range Yellow Or Orange Flame
If the your Samsung gas range flame is yellow or orange, it may be because of your humidifier. The humidifier sends calcium and sodium in the air. These turn orange or yellow when burned. Turn off your humidifier and turn the burner on after 5 hours, the flame should be blue now. To stop your humidifier from sending these chemical elements in the air, use distilled water. If this doesn’t solve the problem, call a technician to identify the problem as there may be incomplete combustion.
Samsung Gas Range Flame FAQ
Is Yellow Flame On A Gas Range Dangerous?
Yes, it is. If you see this type of flame, contact a technician immediately.