A timer is a useful feature in an oven. So if you would like to learn how to use a Samsung oven timer and more, this article is for you.
Table of Contents
How To Set The Timer On A Samsung Oven
To set your Samsung oven timer, follow these steps…
Step 1: Turn on the oven and choose “Bake” or any other cooking function you want.
Step 2: Set the temperature and press “Start”.
Step 3: Press the “Timer on/off” button.
Step 4: Using the up and down arrows or the number pad, set how long you want the timer to run.
Step 5: Press the “Start” button.
If this method doesn’t work on your oven, follow these steps to set your Samsung oven timer…
Step 1: Press the menu button. The button with the three lines going horizontally.
Step 2: Turn the oven dial knob and stop when you see “Timer”.
Step 3: Push the knob in to select.
Step 4: Turn the dial to choose how long the timer should run.
Step 5: Push the knob.
Samsung Oven Stuck On End Timer — How To Fix
If your Samsung oven is stuck on end timer, follow these steps to fix it…
Step 1: Turn the oven off.
Step 2: Switch off the circuit breaker and leave it off for 10 minutes.
Step 3: Switch on the circuit breaker after 10 minutes.
Step 4: Turn the oven back on.
Check out these articles…
Samsung Oven Smells [Problems & Solutions]
Samsung Oven Blinking/Flashing/Flickering [Easy Fix]
Samsung Oven Is Cutting Out [How To Fix]
Samsung Oven Keypad Is Not Working [How To Fix]
Samsung Oven Proof [Detailed Guide]
Samsung Oven Timer Not Working — How To Fix
If your Samsung oven timer is not working, follow these steps to reset it…
Step 1: Unplug the oven’s power cord from the outlet.
Step 2: Leave the oven unplugged for 5 minutes.
Step 3: Plug the oven back into the outlet after 5 minutes.
If that doesn’t fix the problem, read this article to replace the control board in a Samsung oven.
Samsung Oven Timer FAQ
Does Samsung Oven Turn Off After Cook Time?
The oven will stop heating after the cook time is over. However, the display will stay on.
Samsung Oven End Timer
To end your Samsung oven timer, hold down the “Timer on/off” button for 3 seconds.
