Sharp Microwave Won’t Turn On [Solutions]

If your Sharp microwave just won’t turn on, you have come to the right place. We are going to talk about some of the reasons your Sharp microwave won’t turn on and how to fix this problem.

Sharp Microwave Won’t Turn On

If your Sharp microwave won’t turn on, try unplugging it for 5 minutes. After 5 minutes, plug it back in. test to see if the microwave turns on. If your Sharp microwave won’t turn on still, go to the circuit breaker in your house.

Find the one for your microwave and make sure that it is switched on all the way. If it is, switch it off for 5 minutes then turn it back on. If the Sharp microwave won’t turn on, you may need to replace the line fuse. To replace the line fuse in a Sharp microwave, do the following…

Step 1: Turn off and unplug the microwave.

Step 2: Take out the screws at the back of the microwave which hold the microwave cover in place.

Step 3: Lift the microwave cover up but not completely.

Step 4: At the left side of the microwave near the power cord, you will see the line fuse. Remove it from the holder.

Step 5: Get a new line fuse and place it in the holder.

Step 6: Reposition the microwave cover and hold it in place with the screws.

The video below will show you how to replace the line fuse in a Sharp microwave.

Another reason your Sharp microwave won’t turn on may be because of a damaged door latch assembly. To replace a Sharp microwave door latch assembly, follow these steps…

See also  Magic Chef Oven Racks [Detailed Guide]

Step 1: Turn the microwave off and unplug it.

Step 2: Open the microwave door.

Step 3: Using a screwdriver, pry out the trim around the door. You don’t need to pry the whole thing out, just enough to gain access to the door latch.

Step 4: Lift the door latch up and take it out.

Step 5: Hook the spring on the door latch to a different part of the door.

Step 6: If the latch itself is broken, drill a hole in the middle and hook the spring there.

Step 7: Reattach the door latch to the microwave.

Step 8: Align the door trim and snap it back into place.

Step 9: Close the microwave door.

Step 10: Plug the microwave back in.

if you would like a visual on how to replace your Sharp microwave door latch, watch the video below.

Your Sharp microwave may also refuse to come on because of a faulty door switch. To know how to test and replace a door switch, read this article.

Check out these articles…

Sharp Microwave Door [How To/Issues & Solutions]

Sharp Microwave Light [How To/Issues & Solutions]

How to Clean a GE Microwave [Detailed Guide]

GE Microwave Turntable [How To/Issues & Solutions]

GE Microwave Is Not Working [Solutions]

GE Microwave Works but… [Solutions]

GE Microwave Light [How To/Issues & Solutions]

Leave a Comment