There are multiple Whirlpool oven modes. In this article, we will show you how to use a few Whirlpool oven modes and fix some of the problems you may have with them.
Table of Contents
Whirlpool Oven Modes — How To Use
Below, we show you how to use some Whirlpool oven modes…
Whirlpool Oven Sabbath Mode — How To Use
To use this Whirlpool oven mode, follow the steps listed…
Step 1: Open the oven door and place your food inside.
Step 2: Shut the door.
Step 3: Turn the oven on and press the “Bake” button.
Step 4: Using the up and down arrows, input your desired temperature.
Step 5: Press the “Start” button.
Step 6: Hold down the “Timer” button for about 5 seconds.
Step 7: When “Sab” appears on the oven display, press the “Start” button immediately.
Step 8: To cancel sabbath mode, simply press the “Cancel/Off” button.
Whirlpool Oven Pizza Mode — How To Use
To use this Whirlpool oven mode, follow the steps listed below…
Step 1: Open the oven door.
Step 2: Place your pizza inside the oven and shut the door.
Step 3: Turn the oven on by tapping the power button.
Step 4: Tap the “home” button.
Step 5: Tap “Assisted Cooking”.
Step 6: Select the “Pizza” setting.
Step 7: Tap “Next”.
Step 8: Press “Start”.
Step 9: When the oven is done, turn it off.
Step 10: Open the oven door and take out your pizza.
Watch the video below for a visual of how to use your Whirlpool oven pizza mode.
Check out these articles…
Whirlpool Oven Error Codes [How To Fix]
Whirlpool Oven Heating Problems [Proven Solutions]
Whirlpool Oven Noise [Proven Solutions]
Whirlpool Oven Smells [Proven Solutions]
Whirlpool Oven Thermostat [How To, Guide]
Whirlpool Oven Demo Mode — How To Use
Below, we have listed the steps you need to follow in order to use your Whirlpool oven demo mode…
Step 1: Turn the oven on and press the “tools” button.
Step 2: Scroll through the options and tap “Info”.
Step 3: Select “Demo Mode”.
Step 4: Tap “On”.
Step 5: To turn demo mode off, tap the tools button and scroll through the options.
Step 6: Select “Demo Mode” and turn it off.
Whirlpool Oven Diagnostic Mode — How To Use
To use your Whirlpool oven diagnostic mode, follow the steps listed below…
Step 1: Turn the oven on.
Step 2: Tap “Cancel”, “Cancel” and “Start”. Make sure to do this within five seconds.
Step 3: “Tst” will appear on the oven’s display. Use the up and down arrow keys to scroll through diagnostic mode.
The video below will show you how to use Whirlpool oven diagnostic mode.
Whirlpool Oven Clean Mode — How To Use
To use your Whirlpool oven clean mode, follow the steps listed below…
Step 1: Open all the windows in your home.
Step 2: Open the oven door and take out the racks. Also remove any other accessories in the oven.
Step 3: If there are any accessories on the stove top, remove them as well.
Step 4: Wipe out any loose bits of food from the interior of the oven.
Step 5: Shut the door and turn the oven on.
Step 6: Tap the “settings” button.
Step 7: Scroll through the options and select “Self Clean”.
Step 8: Choose one of the three cleaning modes depending on how heavily soiled your oven is.
Step 9: Press “Start”. Once you press the “Start” button, the oven will lock automatically. At the end of the self clean cycle, the oven will stay locked until it has cooled down completely.
Step 10: Once the oven door unlocks, open it.
Step 11: Wipe the oven interior with a damp cloth.
Step 12: Return the racks and all the other accessories to the oven.
Watch the video below for a visual of how to use your Whirlpool oven clean mode.
Whirlpool Oven Mode FAQ
Why Does My Whirlpool Oven Go Into Clean Mode By Itself?
If your Whirlpool oven goes into clean mode by itself, the control board is faulty. Read this article: Whirlpool Oven Control [Problems & Proven Solutions] if you would like to replace the control board of your Whirlpool oven.