Are your Whirlpool stove knobs stuck or do they keep falling off? In this article, we will look at Whirlpool stove knob problems and how to fix them.
Table of Contents
Whirlpool Stove Knob Not Working — How To Fix
If the knob of your Whirlpool stove is no working or turning, follow the step below to fix it…
Step 1: First, turn the stove off.
Step 2: Shut off the gas supply as well.
Step 3: Pull off the stove knob. The knob shouldn’t be hard to pull off. But, if you can’t pull it off, pry it off using a putty knife.
Step 4: Get a lubricant.
Step 5: Squirt the lubricant into the valve stem.
Step 6: Use a pair of pliers to grip the stem and turn it to the right and left.
Step 7: Do this till the stem loosens up.
Step 8: Push the control knob back onto the stem.
Step 9: Turn the stove’s gas supply back on.
Step 10: Test the knob out.
Also follow the steps above if your Whirlpool stove knob is stuck or your Whirlpool stove knob is not turning.
The video below will show you what to do if the knob of your Whirlpool stove won’t turn.
Whirlpool Stove Knob Loose — How To Fix
If the knob of your Whirlpool stove is loose, follow the steps below to fix it…
Step 1: Turn the stove off.
Step 2: Pull off the stove knob or pry it off using a putty knife.
Step 3: Get a business card.
Step 4: Snip off a small rectangular piece of the card.
Step 5: Insert the card piece into the small slot in the cylindrical part of the stove knob.
Step 6: Push the stove knob back onto the valve stem.
The video below will show you what to do if the knob of your Whirlpool stove keeps falling off.
Check out these articles…
Whirlpool Oven Error Codes [How To Fix]
Whirlpool Oven Heating Problems [Proven Solutions]
Whirlpool Oven Noise [Proven Solutions]
Whirlpool Oven Smells [Proven Solutions]
Whirlpool Oven Modes [Problems, Solutions and Guides]
Whirlpool Stove Knob Turns Too Easily — How To Fix
If your Whirlpool stove knob turns too easily, follow the steps listed below to fix it…
Step 1: Turn the stove off.
Step 2: Pull the control knob off.
Step 3: Get a fend washer and slide it onto the valve stem.
Step 4: Now get a small spring about half an inch in length and slide it over the stem.
Step 5: Push the stove knob back onto the stem.
Whirlpool Oven Knob Broken — How To Fix
Follow the steps below to fix your broken Whirlpool oven knob…
Step 1: Pull off the stove knob. If the knob is too difficult to pull off, pry it off using a putty knife.
Step 2: Get a zip tie.
Step 3: Wrap the zip tie around the cylindrical part of the stove knob.
Step 4: Tighten the zip tie on the knob.
Step 5: Cut off the excess zip tie using a pair of pliers.
Step 6: Push the stove knob back onto the valve stem.
The video below will show you what to do if your Whirlpool stove knob is broken.
If the steps above don’t work, that means your stove knob is too broken to be fixed. The better thing to do would be to replace it. Follow these steps to replace your Whirlpool stove knobs…
Step 1: Turn the stove off.
Step 2: Pull off the stove knob.
Step 3: Get a new stove knob.
Step 4: Push the stove knob onto the valve stem.