If you don’t know how to use an LG oven, this article is for you. We will show you how to use an LG oven and it’s functions.
Table of Contents
How To Use An LG Oven For Baking
To bake using an LG oven, follow these steps…
Step 1: Turn the oven on.
Step 2: Press the “Bake” button for the upper or lower oven depending on which one you want to use.
Step 3: Using the numbers on the oven’s control panel, set your desired temperature.
Step 4: Press “Start.
Step 5: Place your food in the oven.
If you would prefer to use convection baking in your LG oven, follow these steps…
Step 1: Turn the oven on.
Step 2: Press “Conv Bake” for either the upper or lower oven.
Step 3: Set your desired temperature using the numbers. Note that the oven will convert the temperature because the heat needed during convection baking is not as much it needs for normal baking.
Step 4: Press the “Start” button.
Step 5: Place your food in the oven.
The video below will show you how to use an LG oven for baking.
How To Use An LG Oven Air Fryer
To use the air fryer function in an LG oven, follow the steps listed below…
Step 1: Open the oven door and take out the racks. Leave only one rack in the oven.
Step 2: Slide the rack into the lowest position possible.
Step 3: Line a baking tray and place it on the oven’s bottom rack.
Step 4: Spread your food on a broiler grid pan or LG air fryer tray if you have it.
Step 5: Slide the tray into the oven. Make sure the rack is on the fourth position.
Step 6: Close the oven door.
Step 7: Press the “Air Fry” button.
Step 8: Set your desired temperature using the numbers.
Step 9: Press “Start”.
Step 10: Press “Timer On/Off” button.
Step 11: Set the desired time by pressing the number keypad.
Step 12: Press the “Timer” button again.
The video below will show you how to use an LG oven air fryer.
How To Use An LG Oven For Pizza
Follow the steps below to cook pizza in an LG oven…
Step 1: Turn the oven on.
Step 2: If you are cooking pizza with a thin crust, press the “Pizza” button once. If you are cooing pizza with a thick crust, press the “Pizza” button twice.
Step 3: Press “Start” to preheat the oven.
Step 4: Once the oven has been preheated, you will hear a few beeps. Open the door of the oven and place the pizza on the rack directly.
Step 5: Close the oven door.
Step 6: When you hear the timer beep, press the “Clear/Off” button.
Watch the video below for a visual of how to use an LG oven for pizza.
Check out these articles…
Neff Oven Is Not Working [Various Problems Solved]
Neff Oven Is Making Noise [Proven Solutions]
How To Prove Dough In A Neff Oven [Detailed Guide]
How To Remove An LG Oven Door [Detailed Guide]
How To Clean An LG Oven [Easy Guide, Problems & Solutions]
How To Make Cake In An LG Oven
To bake a cake in an LG oven, follow these steps…
Step 1: Turn on the oven.
Step 2: Press the “Bake” button for either the upper or lower oven.
Step 3: Set the temperature to 350 degrees F using the numeric pad.
Step 4: Press “Start”.
Step 5: Leave the oven to preheat for 10 minutes.
Step 6: After 10 minutes, open the oven door and place the cake pan with the batter at the center.
Step 7: Do not open the oven too many times or the cake will fall. When a toothpick inserted into the center of the cake no longer comes out moist, take it out.
Step 8: Press the “Clear/Off button.
How To Use Speed Roast In An LG Oven
To use the speed roast function in an LG oven, do the following…
Step 1: Open the oven door and place your food in it. Make sure the rack is in the second position.
Step 2: Close the door and turn the oven on.
Step 3: Turn the knob of the oven and select “Speed Roast”.
Step 4: Set the desired cooking time.
Step 5: Press the “Start” button.
How To Use An LG Oven Probe
To use an LG oven probe, follow the steps listed below.
Step 1: Push the meat probe into the thickest part of the meat.
Step 2: Place the meat in the oven and turn it on.
Step 3: Plug the other end of the meat probe to the jack in the oven. If the meat probe is properly connected, the icon will flash on the display.
Step 4: Select “Conv Roast” by pressing the button on the control panel or turning the dial if your oven has one.
Step 5: Set your desired temperature by pressing the “+” or “-” buttons. If your oven doesn’t have this, set the temperature by pressing the numeric keypad.
Step 6: Press the “Probe” button.
Step 7: Set the temperature for the probe. The temperature you set for the probe is the internal temperature you would like your meat to stop cooking at.
Step 8: Press “Start”.
Step 9: If you want to change the probe temperature while the meat is cooking, press “Probe”.
Step 10: Set the probe temperature again then press “Start”.
How To Use The Proof Setting On An LG Oven
To use the proof setting on an LG oven, follow these steps…
Step 1: Open the oven door and place the food you want to proof in it.
Step 2: Turn the oven knob and stop at “Proof/Warm”.
Step 3: You will see proof on the oven’s display. Press the “Start” button.
How To Turn On An LG Oven
To turn your LG oven on, simply press the “On/Off” button. If this doesn’t work, hold it down for about 3 seconds.
How To Use The Warming Drawer In An LG Oven
To use the warming drawer in an LG oven, follow these steps…
Step 1: Turn on the oven.
Step 2: Open the drawer and place your food in it. Do not cover the food with plastic wrap. Cover the food with foil or an oven safe cover.
Step 3: Close the drawer.
Step 4: Press the “Warming Drawer Set/Off” button on the oven’s control panel.
Step 5: Press “3” to set the drawer to the highest setting, “2” for medium high or “1” for low.
Step 6: Press “Start”.
The video below will show you how to use an LG oven warming drawer.
How To Use The Broiler In An LG Oven
To use the broiler in an LG oven, do the following…
Step 1: Turn on the oven.
Step 2: Turn the knob on the oven and select “Broil High” or “Broil Low”.
Step 3: Press “Start”.
Step 4: Leave the broiler for 5 minutes to preheat.
Step 5: Place your food on the grid and place the broiler pan under it.
Step 6: Place the food in the oven and close the door. Do not leave the oven door open or else the broiler will turn off.
Step 7: Once you are done, turn the knob off.
Step 8: Take out your food from the oven.
Watch the video below for a visual of how to use an LG oven broiler.
How To Adjust LG Oven Temperature
To adjust the temperature of your LG oven, follow these steps…
Step 1: If your oven is on, turn it off by turning the knob to the left.
Step 2: Hold down the “Start Time” button for 3 seconds.
Step 3: Press the “Start Time” button till you see “ADJU” on the oven’s display.
Step 4: Adjust the temperature up or down by 15 degrees using the “+” or “-” button.
Step 5: Press the “Start” button.
Step 6: Test the oven. If the oven temperature doesn’t suit you, follow the same steps above to raise or lower the temperature more.
The video below will show you how to adjust the temperature of your LG oven.
How To Use LG Oven Self Clean
To use the self clean feature in an LG oven, follow the steps listed below…
Step 1: Open the door off the oven and take out any accessories. Make sure nothing is left in the oven.
Step 2: Also make sure that the light cover in the oven is properly screwed.
Step 3: Open all the windows in your kitchen.
Step 4: Turn the oven on.
Step 5: If your LG oven is a double oven, press the “Upper Self Clean” or “Lower Self Clean” to clean your desired oven. If you have a single oven, simply press the “Self Clean” button.
Step 6: Press the “Self Clean” button multiple times depending on how many hours you want it to run.
Step 7: Press “Start”.
Step 8: If you see any smoke coming from the oven during the process, do not be alarmed. This is normal. Do not touch the oven as it will be very hot.
Step 9: Once the self clean is done, leave the oven to cool down completely. If you try opening the oven door before it has cooled down, it won’t open.
Step 10: Once the locked icon disappears from the oven display, open the door.
Step 11: Get a damp cloth and wipe out the ash in the oven.
Step 12: Return the racks and any other accessories to the oven.
Watch the video below for a visual of how to use an LG oven’s self clean feature.
How To Replace An LG Oven Thermal Fuse
To replace the thermal fuse in an LG oven, follow the steps listed below…
Step 1: Turn off and unplug the oven.
Step 2: Pull the oven out in order to access the back.
Step 3: Take out the screws securing the lower back panel of the oven.
Step 4: Remove the back panel.
Step 5: Disconnect the wires connected to the thermal fuse.
Step 6: Take out the screws which hold the thermal fuse to the oven.
Step 7: Get a new thermal fuse.
Step 8: Screw the new thermal fuse into place.
Step 9: Reconnect the wires to the thermal fuse.
Step 10: Reposition the lower back panel and secure it with the screws.
Step 11: Push the oven back to its usual position.
Step 12: Plug the oven back in.
Note: The thermal fuse in an LG oven is usually replaced because the oven will not heat after the self clean cycle.
How To Use LG Oven Easy Clean
Follow the steps below to use the easy clean feature in an LG oven…
Step 1: Open the oven door and take out the racks and any other accessories in it.
Step 2: If there is any burnt debris in the oven, scrape it off using a plastic scraper.
Step 3: Spray water all over the oven walls making sure to cover any soils with water.
Step 4: If you are cleaning your upper oven, press “Upper Easy Clean”. If you are cleaning your lower oven, press “Lower Easy Clean”.
Step 5: You will hear a sound from the oven when the easy clean cycle is over.
Step 6: Press the “Clear/Off” button.
Step 7: Scrub the oven with a soft sponge.
Step 8: Wipe of water in the oven using a soft and dry towel.
Step 9: Return the racks and any other accessories you removed earlier.
Note: The easy clean feature is normally used for light soils. So if your oven is very dirty, this won’t be effective in getting rid of the dirt.
The video below will show you how to use an LG oven’s easy clean feature.
How To Take An LG Oven Door Off
To remove the door of your LG oven, follow these steps…
Step 1: Turn the oven off.
Step 2: Open the oven door.
Step 3: Flip the clips on the door hinges towards yourself.
Step 4: Close the oven door till it can’t go any further.
Step 5: Lift the door off the oven.
How To Clean An LG Oven With A Blue Interior
To clean an LG oven with a blue interior, follow the steps below…
Step 1: Turn off the oven.
Step 2: Open the oven door and scrape of any baked on food in it with a plastic scraper.
Step 3: Wipe out the burnt bits of food using a paper towel.
Step 4: Pour some baking soda into a small bowl.
Step 5: Add some water to the baking soda to form a paste.
Step 6: Using a sponge, apply the paste to the oven interior and door.
Step 7: Close the door and leave the baking soda to sit for an hour or more.
Step 8: Afterwards, open the oven door and spray vinegar in it.
Step 9: Scrub with a sponge.
Step 10: Wipe the oven with paper towels.
Step 11: Spray water in the oven and on the door to rinse.
Step 12: Wipe the whole oven with a cloth.
Step 13: If there are any black spots in the oven, scrub it off using a pumice stone.
Step 14: Wipe the oven once again then close the door.