There are many Kitchenaid oven modes and most of them are useful. In this article we will talk about Kitchenaid oven modes and how to use them.
Table of Contents
Kitchenaid Oven Modes — How To Use
Below we show you how to use different Kitchenaid oven modes…
Kitchenaid Oven Self Clean Mode — How To Use
To use this Kitchenaid oven mode, follow the steps listed below…
Step 1: Open all the windows in your home.
Step 2: Open the oven door and take out the racks.
Step 3: Take out any other accessories in the oven or bottom drawer.
Step 4: Wipe off any loose food debris from the oven’s interior with a paper towel.
Step 5: Remove any pans or plastic plates from your oven cook top as it will get very hot while in use.
Step 6: Close the oven door.
Step 7: Press the “settings” button and scroll through the options to select “Self Clean”. If your oven doesn’t have a settings button, press the “Self Clean” button.
Step 8: Scroll through the options to select low, medium, or high self clean. Low runs for 3 hours, medium runs for 4 hours, and high runs for 5 hours.
Step 9: Press the “Start” button to begin. Make sure to keep kids and pets away from the oven during the self clean cycle. During the cycle, the oven will get very hot and you may see smoke. It’s also normal for you to hear a sound of metal contracting as well.
Step 10: Once the self clean cycle is done, do not try opening the door. Leave the oven to cool down.
Step 11: Once the oven has cooled down, open the door.
Step 12: Using a damp towel, wipe off the ash in the oven.
Step 13: Return the racks and any other accessories to the oven.
Step 14: Shut the door.
Note: The self clean feature works by burning off food debris and grease in the oven with high temperatures. During the cycle, the oven heats up and burns off the grease in the oven. Sometimes, after using this function, the oven won’t turn on. If this happens to you, read this article.
If you would like a visual of how to use the self clean cycle in a Kitchenaid oven, watch the video below.
Check out these articles…
How To Calibrate A Kitchenaid Oven [Quick Guide]
Kitchenaid Oven Element [How To, Problems & Solutions]
Kitchenaid Oven Control Panel [Issues & Solutions]
Kitchenaid Oven Broiler [How To, Issues & Solutions]
Kitchenaid Oven Noise [How To Fix]
Kitchenaid Oven Dehydrate Mode — How To Use
Follow the steps listed below to use this Kitchenaid oven mode…
Step 1: Open the oven door and place your food on the rack.
Step 2: Shut the door and turn the oven on.
Step 3: Turn the oven control knob to select “dehydrate”.
Step 4: After choosing this function, the oven will display 150. If you choose to change the temperature, turn the temperature control knob.
Step 5: If you want to adjust the length of time for the oven to run, turn the timer control knob.
Step 6: Press the “Start” button.
Step 7: After dehydrating, take your food out of the oven and turn it off.
Kitchenaid Oven Proof Mode — How To Use
Below, we show you how to use this Kitchenaid oven mode…
Step 1: Place the dough in an oiled bowl.
Step 2: Cover the dough with some lightly oiled wax paper.
Step 3: Place the bowl of dough in the oven’s drawer.
Step 4: Close the drawer and turn the oven on.
Step 5: Turn the oven’s control knob to select “Proof”.
Step 6: Place the vent on the moist setting.
Step 7: Press “Start”. The dough should take half the time it normally takes to proof.
Kitchenaid Oven Energy Saver Mode — How To Use
To use this Kitchenaid oven mode, do the following…
Step 1: Locate the “Settings/Clock” button.
Step 2: Press and hold the button for about three seconds. The energy saver mode will turn on after 5 minutes.
Step 3: To turn off energy saver mode, hold the same button down.
Kitchenaid Oven Diagnostic Mode — How To Use
To use the Kitchenaid oven diagnostic mode, follow the steps below…
Step 1: Press the “Cancel” button twice then press “Start”.
Step 2: To scroll through the screen, press the “3” and “6” buttons.
Kitchenaid Oven Demo Mode — How To Use
To use this Kitchenaid oven mode, follow the steps listed below…
Step 1: Press the “Tools” button.
Step 2: Press “8”.
Step 3: To turn off demo mode, do the same thing again.
The video below will show you how to use the Kitchenaid oven demo mode.