The Samsung oven fast boil is very useful when you want you don’t have much time on hand. So if you want to learn how to use the Samsung oven fast boil feature, keep reading.
How To Use Fast Boil On Samsung Stove
To use the Samsung oven fast boil feature, follow the steps listed below…
Step 1: Place your pot or pan on the fast boil burner. The fast boil burner is the one on the front right of the stove top with “Fast boil” written on the edge.
Step 2: Make sure your oven is plugged in.
Step 3: Turn the fast boil burner knob on.
Samsung Oven Fast Boil Not Working — How To Fix
If your Samsung oven fast boil isn’t working, the heating element is probably faulty. Below are the steps you need to follow in order to replace the heating element of your Samsung fast boil burner…
Step 1: Pull the oven away from the wall.
Step 2: Turn off the oven’s circuit breaker or unplug the power cord from the outlet.
Step 3: Using a Philips head screwdriver, take out the screws around the rear of the oven which holds the lower panel in place.
Step 4: Lift off the lower rear panel of the oven and set it aside.
Step 5: Also take out the screws which hold the upper back panel of the oven.
Step 6: Remove the panel and set it aside.
Step 7: Unplug the wire harness on the left side of the oven. The wire has a mixture of black, orange, and yellow wires.
Step 8: Unscrew the green grounding wire close to the wire harness.
Step 9: Carefully push the wire harness and grounding wire into the opening in the oven.
Step 10: Disconnect the two wire harnesses on the right side of the oven.
Step 11: Push the wire harnesses into the opening.
Step 12: Go to the front of the oven and open the door.
Step 13: Remove the Philips head screws underneath the front of the oven cooktop.
Step 14: Lift the cooktop off and set on a towel lined surface with the front side facing downwards.
Step 15: Take a picture of where the wires are connected to on the faulty element.
Step 16: Disconnect the wires from the faulty element.
Step 17: Take out the screws holing the element to the bracket.
Step 18: Using a pair of pliers, squeeze the tabs of the element through the slots to release it.
Step 19: Remove the heating element and get a new one.
Step 20: Position the new element on the bracket. Do not touch the coils as the oils on your hand could damage them.
Step 21: Return the screws which secure the element.
Step 22: Reconnect the wires to the right heating element terminals.
Step 23: Reposition the cooktop and pass the wire harnesses through the openings at the back of the oven.
Step 24: Hold the cooktop in place using the three screws.
Step 25: Close the door and go to the back of the oven.
Step 26: Reconnect the wire harnesses at the right.
Step 27: Connect the other wire harness at the left and screw the grounding wire back into place.
Step 28: Reposition the upper panel of the oven and return the screws which secure it.
Step 29: Also return the lower panel and the screws which secure it.
Step 30: Plug the oven back into the outlet and push it to the wall.
If you would like a visual of how to replace the element of your fast boil burner, watch the video below.
Check out these articles…
Samsung Fast Boil Vs Rapid Boil
While the fast boil burner cooks faster than a regular one, the rapid boil burner works even faster than the fast boil. The rapid boil takes about 1 minute 30 seconds to boil two cups of water while the fast boil takes about 3 minutes.
Slow Boil Vs Rapid Boil
Slow boil is the point where small bubbles form in the water and it’s basically simmering. Rapid boil is when the bubbles in the water break vigorously and much faster than a slow boil. This is also known as a rolling boil.
How Does Samsung Oven Fast Boil Work?
Fast boil works by using a larger and hotter burner than a regular one to boil water more quickly. This burner helps you cook food in a shorter time than you would using a normal burner.